Fuel Filters Shop
Fuel Filters Shop

Fuel Filters

Fuel Filters Shop

Fuel Filters Shop
!
FK67
Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Maximum input pressure: 10 PSI (0.7 Bar)
  • Suitable for engines up to 150 BHP.
  • Clear glass bowl for easy inspection of the condition of the filter element
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 6 mm AND 8 mm fuel lines.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines both with and internal diameter of 6 mm as well as 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

FK67E
Malpassi Filter King 67 MM Replacement Fuel Filter Element

Malpassi Filter King 67 mm Replacement Fuel Filter Element

Replacement element for the 67 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element only.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct element for you.

If it measures 85 millimeter, you need THIS element instead.

Malpassi Filter King 67 MM Replacement Fuel Filter Element

RA005
Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a cast metal bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

 

 

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

RA007
Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Cast Metal. Excellently suited for competition use.
Alternatively, a clear glass bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

FK85
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

FK85/G
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Includes a Sytec Pressure Gauge
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

FK85/T
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with a clear glass bowl that allows to quickly inspect the condition of the filter element.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

FK85E
Malpassi Filter King 85 MM Replacement Fuel Filter Element

Malpassi Filter King 85 mm Replacement Fuel Filter Element

Replacement element for the 85 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element and new spring.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct element for you.

If it measures 67 millimeter, you need THIS element instead.

Malpassi Filter King 85 MM Replacement Fuel Filter Element

RA006
Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a virtually unbreakable cast metal bowl is also available.

Measures 61.5 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

RA008
Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Virtually unbreakable cast metal version. Very well suited for competition use.
Alternatively, a clear glass bowl is also available

Measures 61.1 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

FPA906

1/8'' Screw-On Fuel Pump Filter

This is a special screw-on fuel filter to be used with a variety of electric fuel pumps.

Failure to operate those pumps with a suitable filter like this usually voids the warranty on the pump!

This filter suits, amongst others, the Airtex 6Volt filter and the range of Solid State fuel filters by Facet.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Union for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

1/8'' Screw-On Fuel Pump Filter

PRO804
Sytec Pro-Line in-line fuel filter - 6 mm

Sytec Pro-Line in-line fuel filter - 6 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 6 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 6 mm internal diameter

Sytec Pro-Line in-line fuel filter - 6 mm

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

FPA908R
74 Micron Replacement Facet GOLD-FLO Fuel Pump Filter Element

74 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

Replacement Facet Fuel Pump Filter Element in 74 Micron.

Fits the Facet GOLD-FLO and Interrupter series fuel pumps.

Suitable for gasoline and alcohol engines.

For Diesel engines and situations where a higher degree of filtration is required, please use the 200 Micron filter.

 

74 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

FPA908B
200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

Replacement Facet Fuel Pump Filter Element in 200 Micron.

Fits the Facet GOLD-FLO and Interrupter series fuel pumps.

Especially designed for Diesel engines and situations where the standard filter of 74 Micron doesn't suffice.

 

 

200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

WFP150KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Newly arrived Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.

A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

WFP151KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Newly arrived Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on high-pressure injection systems.

A low-pressure set for carbureted systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

67263TS
Roll of Superior Quality PTFE Thread Sealing Tape

Roll of Superior Quality PTFE Thread Sealing Tape

Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.

12 millimeter wide

Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!

As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.

 

 

Roll of Superior Quality PTFE Thread Sealing Tape