Ford Carburetor Service Kits
Ford Carburetor Service Kits

Ford

Ford Carburetor Service Kits.

On this page you will find the carburettor rebuild kits that we can supply for the various Ford models.

If your model isn't listed yet, please contact us by email as there is a good chance that we can help you anyway.

Our Contact Page can be found HERE.

!

Ford Carburetor Service Kits

!
SOLEXB26
Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for the Solex B26 ZIC 2 carburetors as used on, amongst others, the Ford Anglia with 100E engine.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars, and even marine engines (!), so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Gaskets
  • Washers
  • Complete Needle Valve Assembly

Please note that this concerns a so-called New-Old-Stock set with original needle valve and that these sets are getting VERY thin on the ground as there is NO current production.

Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

SOLEXB26
Service Kit for Zenith B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for Zenith B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for the Zenith B26 ZIC 2 carburetors as used on, amongst others, the Ford Anglia with 100E engine.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars, and even marine engines (!), so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Gaskets
  • Washers
  • Complete Needle Valve Assembly

Please note that this concerns a so-called New-Old-Stock set with original needle valve and that these sets are getting VERY thin on the ground as there is NO current production.

Service Kit for Zenith B26 ZIC 2 carburetors for Ford Anglia 100E

PMM1
Service Kit for Motorcraft VV carburetors for Ford

Service Kit for Motorcraft VV carburetors for Ford

Newly arrived Service Kit for Motorcraft VV carburetors for Ford

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used by Ford on various models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines.
Consequently, the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford

PMM1
Service Kit for Motorcraft VV carburetors for Ford Capri 1300

Service Kit for Motorcraft VV carburetors for Ford Capri 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1979 - 1981 Ford Capri 1300 - 1297 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Capri 1300

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1968 - 1972 Ford Capri 1700, 2000, 2300 and 2600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Capri MKII 2300
  • Ford Capri MKII 2500

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

PMS247
Service Kit for Solex 32 TDID carburetors for Ford Consul 1700 V4

Service Kit for Solex 32 TDID carburetors for Ford Consul 1700 V4

Service kit for the Solex 32 TDID carburetors as used on, amongst others, the:

  • 1972 - 1974 Ford Consul 1700 V4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex 32 TDID carburetors for Ford Consul 1700 V4

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 Ford Consul 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

PMM1
Service Kit for Motorcraft VV carburetors for Ford Cortina 1300

Service Kit for Motorcraft VV carburetors for Ford Cortina 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1979 - 1982 Ford Cortina MKII, MKII & MKIV 1300

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Cortina 1300

PMM1
Service Kit for Motorcraft VV carburetors for Ford Cortina 1600

Service Kit for Motorcraft VV carburetors for Ford Cortina 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1979 - 1982 Ford Cortina 1600 - 1593 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Cortina 1600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 MKV Ford Cortina 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors as used on the 1967 - 1970 1558 cc Lotus Ford Cortina.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

PMM1
Service Kit for Motorcraft VV carburetors for Ford Escort 1100

Service Kit for Motorcraft VV carburetors for Ford Escort 1100

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1980 - 1989 Ford Escort 1100 - 1117 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Escort 1100

PMM1
Service Kit for Motorcraft VV carburetors for Ford Escort 1300

Service Kit for Motorcraft VV carburetors for Ford Escort 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1980 - 1986 Ford Escort 1300 - 1297 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Escort 1300

PMM1
Service Kit for Motorcraft V V carburetors for Ford Escort XR3 1600

Service Kit for Motorcraft VV carburetors for Ford Escort XR3 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1980 - 1986 Ford Escort XR-3 1600 - 1598 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Escort XR3 1600

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used on, amongst other, the:

  • 1970 - 1975 Ford Escort 1600 - 1601 cc
  • 1968 - 1971 Ford Escort 1600 DOHC - 1558 cc

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used on, amongst other, the:

  • 1975 - 1980 Ford Escort RS2000

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

PMM1
Service Kit for Motorcraft V V carburetors for Ford Fiesta 1300

Service Kit for Motorcraft VV carburetors for Ford Fiesta 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1983 - 1986 Ford Fiesta 1300 - 1297 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Fiesta 1300

PMS247
Service Kit for Solex 32 TDID carburetors for Ford Granada 1700 V4

Service Kit for Solex 32 TDID carburetors for Ford Granada 1700 V4

Service kit for the Solex 32 TDID carburetors as used on, amongst others, the:

  • 1975 - 1981 Ford Granada 1700 V4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex 32 TDID carburetors for Ford Granada 1700 V4

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1975 - 1981 Ford Granada 2000 V6 - 1998 cc
  • 1975 - 1985 Ford Granada 2300 - 2293 cc
  • 1975 - 1977 Ford Granada 2600 - 2550 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

PMM1
Service Kit for Motorcraft V V carburetors for Ford Orion 1100

Service Kit for Motorcraft VV carburetors for Ford Orion 1100

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1980 - 1989 Ford Orion 1100 - 1117 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Orion 1100

PMM1
Service Kit for Motorcraft V V carburetors for Ford Orion 1300

Service Kit for Motorcraft VV carburetors for Ford Orion 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1980 - 1989 Ford Orion 1300 - 1297 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Orion 1300

PMM1
Service Kit for Motorcraft V V carburetors for Ford Orion 1600

Service Kit for Motorcraft VV carburetors for Ford Orion 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1983 - 1987 Ford Orion 1600 - 1598 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Orion 1600

PMM1
Service Kit for Motorcraft V V carburetors for Ford P100 1600

Service Kit for Motorcraft VV carburetors for Ford P100 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford P-100 Pick-Up 1600 - 1593 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford P100 1600

PMM1
Service Kit for Motorcraft V V carburetors for Ford Sierra 1300

Service Kit for Motorcraft VV carburetors for Ford Sierra 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1982 - 1987 Ford Sierra 1300 - 1294 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Sierra 1300

PMM1
Service Kit for Motorcraft V V carburetors for Ford Sierra 1600

Service Kit for Motorcraft VV carburetors for Ford Sierra 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford Sierra 1600 - 1593 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Sierra 1600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1982 - 1985 Ford Sierra 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1972 - 1975 Ford Taunus 1700 V4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

FR3622
Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service kit for the Solex and Pierburg PDSI 32 series carburetors as, amongst others, used on the following cars:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500
  • 1968 - 1971 Ford Taunus 12M TS P4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

PMS246
Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

Service Kit for the Pierburg 30 PDSI and 28 PDSIT 4 carburetors as fitted on, amongst others, the:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete Needle Valve Size 150
  • Float Chamber Gasket
  • Base Gasket
  • Choke Housing O-Ring
  • Choke Housing Gasket
  • All Required Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

PMM1
Service Kit for Motorcraft V V carburetors for Ford Taunus 1300

Service Kit for Motorcraft VV carburetors for Ford Taunus 1300

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1979 - 1982 Ford Taunus 1300

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Taunus 1300

PMM1
Service Kit for Motorcraft V V carburetors for Ford Taunus 1600

Service Kit for Motorcraft VV carburetors for Ford Taunus 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • 1979 - 1982 Ford Taunus 1600 - 1593 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Taunus 1600

PMM1
Service Kit for Motorcraft V V carburetors for Ford Taunus V6 2000 - 2300 - 2600

Service Kit for Motorcraft VV carburetors for Ford Taunus V6 2000 - 2300 - 2600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford Taunus V6 2000 - 2300 - 2600 HC

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Taunus V6 2000 - 2300 - 2600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2300 L - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

PMM1
Service Kit for Motorcraft V V carburetors for Ford Transit 1600

Service Kit for Motorcraft VV carburetors for Ford Transit 1600

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford Transit 1600 - 1598 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Transit 1600

PMM1
Service Kit for Motorcraft VV carburetors for Ford Transit 2000

Service Kit for Motorcraft VV carburetors for Ford Transit 2000

Service set for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford Transit 2000 - 1993 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various paper gaskets
  • Cork float chamber gasket

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Motorcraft VV carburetors for Ford Transit 2000

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allow you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets of 3.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for stainless steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easy to read scale
  • Comes complete with 4 x 5 mm and 4 x 6 mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

    Total length of unit 121mm

    Rubber cone dimensions:
    Small end diameter 40mm
    Large end diameter 55mm
    Length of cone 36mm

Synchrometer airflow meter for carburetors