Dellorto PHBD Parts

Dellorto PHBD Carburetor Parts
Dellorto PHBD Carburetor Parts

Dellorto PHBD Carburetor Parts.

On this page you will find all currently available parts for the Dellorto PHBD range carburetors.

Click HERE for an exploded view drawing of the Dellorto PHBD.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Click HERE for instructions on how to set the float level of the Dellorto PHBD.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto PHBD Carburetor Parts

(5) Main Jet for Dellorto PHBD carburetors - 1486

Add to cart
1486

Factory original main jet for the Dellorto PHBD carburetors.

Where possible, we only supply original Dellorto jets marked with the famous diamond-shaped "Inc" logo.
However, sizes that are no longer supplied by Dellorto themselves are manufactured for us to the exact same high standards.

Available from our stock in sizes:

  • 33
  • 35
  • 36
  • 38
  • 40
  • 45
  • 48
  • 50
  • 53
  • 55
  • 57
  • 58
  • 60
  • 62
  • 65
  • 67
  • 72
  • 80
  • 82
  • 84
  • 86
  • 88
  • 90
  • 91
  • 92
  • 95
  • 98
  • 100
  • 105
  • 108
  • 110
  • 112
  • 115
  • 118
  • 120

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 5 in the drawing.

Dellorto Part Number: 1486

(5) Main Jet for Dellorto PHBD carburetors - 1486

(6) Idle Jet for Dellorto PHBD carburetors - 1488

Add to cart
1488

Factory original idle jet for the Dellorto PHBD carburetors.

Where possible, we only supply original Dellorto jets marked with the famous diamond-shaped "Inc" logo. However, sizes that are no longer supplied by Dellorto themselves are manufactured for us at the exact same high standards.

Thread size: M5 x 0.8 mm.

Available from our stock in sizes:

  • 30
  • 32
  • 35
  • 38
  • 40
  • 42
  • 45
  • 48
  • 50
  • 52
  • 55
  • 58
  • 60

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

Dellorto Part Number: 1488

(6) Idle Jet for Dellorto PHBD carburetors - 1488

(8) Float Assembly for Dellorto PHBD carburetors

Add to cart
9450

Factory original float assembly for the Dellorto PHBD series carburetors.

Currently available in the following weight versions:

  • 9450.1 - 4 grams
  • 9450.2 - 5 grams

We strongly advice against experimenting with float weights.
So if your original float is damaged, only replace it with one of the same weight.

Click HERE for instructions on how to set the float level of the Dellorto PHBD.

Required quantity per carburettor: 1

This is item number 8 in the drawing.

(8) Float Assembly for Dellorto PHBD carburetors

(9) Rubber Cable Boot for Dellorto PHBD carburetors

Add to cart
1476A

Rubber cable cap for the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 9 in the drawing.

 

 

 

 

(9) Rubber Cable Boot for Dellorto PHBD carburetors

(10) Throttle Cable Adjuster for Dellorto PHBD carburetors

Add to cart
1104

Throttle cable adjuster for the Dellorto PHBD series carburetors.

Required number per carburettor: 1

This is item number 10 in the drawing.

 

 

 

(10) Throttle Cable Adjuster for Dellorto PHBD carburetors

(19) Needle Circlip for Dellorto PHBD carburetors

Add to cart
9596

Circlip to secure the needle on the Dellorto PHBD series carburettors.

Required quantity per carburettor: 1

This is item number 19 in the drawing.

 

 

(19) Needle Circlip for Dellorto PHBD carburetors

(32) Throttle Stop Screw for Dellorto PHBD carburetors

Add to cart
7673

Throttle Stop Screw for Dellorto PHBD carburetors.

Screw to regulate the idle opening of the throttle slide on the PHBD carburettors.

Total length: 29.5 mm
Please contact us by email in case that you require a different length.

Required quantity per carburettor: 1

This is item number 32 in the drawing.

 

 

(32) Throttle Stop Screw for Dellorto PHBD carburetors

(33) Throttle Stop Screw Spring for Dellorto PHBD carburetors

Add to cart
4670

Throttle Stop Screw Spring for Dellorto PHBD carburetors.

Spring that secures the setting of the throttle stop screw on the PHBD carburettors.

Required quantity per carburettor: 1

This is item number 32 in the drawing.

 

 

(33) Throttle Stop Screw Spring for Dellorto PHBD carburetors

(34) Mixture screw for Dellorto PHBD carburetors - 2.5 mm tip - 9517

Add to cart
9517

Mixture screw suitable for the Dellorto PHBD series carburetors.

Please note that there are two version available of this mixture screw:

1) This version here with a tip of 2.5 mm in length
2) Version 9335 with a tip of 5 mm in length

Required quantity per carburettor: 1

This is item number 34 in the drawing.

Part Number: 9517

(34) Mixture screw for Dellorto PHBD carburetors - 2.5 mm tip

(34) Mixture screw for Dellorto PHBD carburetors - 5 mm tip - 9335

Add to cart
9335

Mixture screw suitable for the Dellorto PHBD series carburetors.

Please note that there are two version available of this mixture screw:

1) This version here with a tip of 5 mm in length
2) Version 9517 with a tip of 2.5 mm in length

Required quantity per carburettor: 1

This is item number 22 in the drawing.

Part Number: 9335

(34) Mixture screw for Dellorto PHBD carburetors - 5 mm tip - 9335

(35) Mixture screw spring for Dellorto PHBD carburetors - 9336

Add to cart
9336

Mixture screw spring for suitable for the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 35 in the drawing.

Part Number: 9336

(35) Mixture screw spring for Dellorto PHBD carburetors - 9336

(36) Mixture screw spring washer for Dellorto PHBD carburetors

Add to cart
8260

Washer that keeps the mixture screw spring in place on the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 36 in the drawing.

 

(36) Mixture screw spring washer for Dellorto PHBD carburetors

(37) O-Ring for mixture screw on Dellorto PHBD carburetors

Add to cart
8678

Viton (rubber) O-Ring for mixture screw on Dellorto PHBD series carburetors.

Required number per carburettor: 1

This is item number 37 in the drawing.

 

 

(37) O-Ring for mixture screw on Dellorto PHBD carburetors

(40) Float Bowl Gasket for Dellorto PHBD carburetors

Add to cart
9497

Float bowl gasket for the Dellorto PHBD series carburetors.

Fits both varieties of float bowl (numbers 41 and 45 in the drawing).

Required number per carburettor: 1

This is item number 40 in the drawing.

 

 

(40) Float Bowl Gasket for Dellorto PHBD carburetors

Sytec Fuel Line One Way Valve

Add to cart
OWV

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

Sytec Pro-Line in-line fuel filter - 6 mm

Add to cart
PRO804

In line fuel filter with cleanable / replaceable filter.

Suitable for 6 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 6 mm internal diameter

Sytec Pro-Line in-line fuel filter - 6 mm

Sytec Pro-Line in-line fuel filter - 8 mm

Add to cart
PRO805

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

Replacement elements for Sytec in-line fuel filter

Add to cart
PRO896

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Add to cart
flexoid5xa4

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Carburettor Jet Gauges

Add to cart
jet sizer

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

Add to cart
JSG01

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

54-Piece Jet Drill Set

Add to cart
JDK01

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

16-Piece Jet Reamer Set

Add to cart
JET REAMER

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

Add to cart
G4074

Gunson Colortune See Through Spark Plug Kit

Dellorto Carburatori Sticker - Large

Add to cart
DD0906

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Medium

Add to cart
DD0909

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Small - Low

Add to cart
DD0905

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sew-On Patch

Add to cart
Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

Dellorto Carburatori Sew-On Patch

10 ml Loctite 542 Thread Sealant

Add to cart
LOCTITE542-10ML

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

Add to cart
LOCTITE243-5ML

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

Add to cart
G4125

Gunson Digital Exhaust Gas and CO Tester - G4125

!