Mikuni BDS Carburetor Parts and Service Kits
Mikuni BDS Carburetor Parts and Service Kits

Mikuni BDS Parts

Mikuni BDS carburetor parts and rebuild kits.

On this page you will find all currently available parts for the Mikuni BDS range carburetors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Mikuni BDS Carburetor Parts and Service Kits

!
KSK941YK
Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1200 Venture motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK941YK
Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Rebuild kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSKY0542F
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the FRONT carburetor.

The set for the rear carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ10 - Replaces Mikuni numbers 2GV-1490J-00 and 3BM-1490J-00
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 135 - replaces Mikuni number 3G2-14231-27
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

KSKY0542R
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the REAR carburetor.

The set for the front carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ9 - Replaces Mikuni numbers 2GV-1490J-10 and 3BM-1490J-10
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 137.5 - replaces Mikuni number 3G2-1423A-78
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

KSK941YK
Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

This is our standard rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

If you desire a more elaborate kit, you can find the comprehensive kit for the FRONT carburetor HERE and the one for the REAR carburetor HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

KSK17B
Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1300 Venture

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1300 Venture

Rubber (Viton) gasket to seal the float bowl on the Mikuni BDS series carburetors as used on, amongst others, the Yamaha XVZ 1300 Venture.

This seal fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Replaces Mikuni part number: 22V-14147-00

 

 

 

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1300 Venture

KSK17B
Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XV535 Virago

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XV535 Virago

Rubber (Viton) gasket to seal the float bowl on the Mikuni BDS series carburetors as used on, amongst others, the Yamaha XV 535 Virago.

This seal fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Replaces Mikuni part number: 22V-14147-00

 

 

 

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XV535 Virago

KSK17B
Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha V-Max VMX1200

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha V-Max VMX1200

Rubber (Viton) gasket to seal the float bowl on the Mikuni BDS series carburetors as used on, amongst others, the Yamaha V-Max VMX 1200.

This seal fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Replaces Mikuni part number: 22V-14147-00

 

 

 

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha V-Max VMX1200

KSK17B
Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1200 Venture

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1200 Venture

Rubber (Viton) gasket to seal the float bowl on the Mikuni BDS series carburetors as used on, amongst others, the Yamaha XVZ 1200 Venture.

This seal fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Replaces Mikuni part number: 22V-14147-00

 

 

 

Rubber Float Bowl Gasket for Mikuni BDS carburetors for Yamaha XVZ1200 Venture

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XV 535 Virago.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

KSN167032
Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

Original Mikuni rubber cap to seal the idle (or slow running) jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XV535 Virago.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167032

 

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV535 Virago

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XVZ 1200 Venture.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

KSN167032
Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

Original Mikuni rubber cap to seal the idle (or slow running) jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XVZ 1200 Venture.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167032

 

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XVZ1200 Venture

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha V-Max VMX 1200.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

KSN167032
Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

Original Mikuni rubber cap to seal the idle (or slow running) jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha V-Max VMX 1200.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167032

 

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha V-Max VMX1200

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors for Yamaha XV500

Rubber Plug for the Main Jets on the Mikuni BDS carburetors for Yamaha XV500

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamah XV 500.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors for Yamaha XV500

KSN167032
Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV500

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV500

Original Mikuni rubber cap to seal the idle (or slow running) jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XV 500.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167032

 

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV500

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ13

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ13

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XVZ 13.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ13

KSN167031A
Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1300 Venture

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1300 Venture

Original Mikuni rubber cap to seal the main jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XVZ 1300 Venture.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167031a

 

 

 

Rubber Plug for the Main Jets on the Mikuni BDS carburetors of the Yamaha XVZ1300 Venture

KSN167032
Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV1300 Venture

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV1300 Venture

Original Mikuni rubber cap to seal the idle (or slow running) jets on the Mikuni BDS series carburetors as used on, amongst other, the Yamaha XVZ1300 Venture.

This plug fits both the Mikuni BDS34 as well as the Mikuni BDS35.

Mikuni part number: N167032

 

Rubber Plug for the Idle Jets on the Mikuni BDS carburetors of the Yamaha XV1300 Venture

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easy to read scale
  • Comes complete with 4 x 5 mm and 4 x 6 mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Newly arrived Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

    Total length of unit 121mm

    Rubber cone dimensions:
    Small end diameter 40mm
    Large end diameter 55mm
    Length of cone 36mm

Synchrometer airflow meter for carburetors