Dellorto FRD Carburetor Parts
Dellorto FRD Carburetor Parts

Dellorto FRD Parts

On this page you will find all currently available parts for the Dellorto FRD range carburettors.

Click HERE for an exploded view drawing of the FRD.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Click HERE for float level setting instructions for the Dellorto FRD.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto FRD Carburetor Parts

!
FRD34KIT
Factory original Rebuild Kit for Dellorto FRD carburetors

Rebuild Kit for Dellorto FRD carburetors

Rebuild Kit for Dellorto FRD carburetors.

Factory original Dellorto service kit.

Contains the following parts to service 1 carburettor.

  • Various gaskets
  • Aluminum washer
  • Fiver washer
  • Viton (rubber) o-rings
  • Needle valve assembly
  • Fuel screen filter
  • Pump diaphragm

Factory original Rebuild Kit for Dellorto FRD carburetors

6413
(3) Main Jet for Dellorto FRD carburetors

(3) Main Jet for Dellorto FRD carburetors

Main jet for the Dellorto FRD series carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

In stock in sizes:

  • 52
  • 54
  • 56
  • 58
  • 60
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 108
  • 105
  • 110
  • 115
  • 118
  • 120
  • 125
  • 130
  • 135
  • 140
  • 145
  • 150
  • 155
  • 160
  • 165
  • 170
  • 172
  • 175
  • 180
  • 182
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 3 in the drawing.

(3) Main Jet for Dellorto FRD carburetors

6371

(11) Float for Dellorto FRD carburettors

Original float for the Dellorto FRD series carburettors.

Only replace your defective float by the same version and weight. We strongly advise against experimenting with float weights.

Available in the following versions:

  • 6371.1 - 7.5 grams
  • 6371.2 - 5.5 grams

Required quantity per carburettor: 1

This is item number 11 in the drawing.

Click HERE for float level setting instructions.

6416

(42) Butterfly Screw for Dellorto FRD carburettors

Butterfly screw for the Dellorto FRD series carburettors.

When replacing your butterfly valves, ALWAYS use new screws, use a locking agent AND peen them to secure them in place.

NEVER re-use old screws!

Required quantity per carburettor: 2

This is item number 42 in the drawing.

6423

(43) Spindle Nut for Dellorto FRD carburettors

Spindle nut for Dellorto FRD series carburettors.

This is item number 43 in the drawing.

 

 

TECHBOOK DELLORTO
Dellorto DRLA VW tech book

Dellorto DRLA VW tech book

Dellorto tech book by Bob Tomlinson, the US dealer for Dellorto carburetors.

This book is mainly aimed at the DRLA carbs but has small sections about the DHLA and FRD carbs as well.

Topics covered in 125 pages:

Fitting, tuning, overhauling, jet selection & charts, troubleshooting, ignition timing, air filters, engine tuning etc.

This is the most comprehensive manual available for fitting and tuning Dellorto carburetors on VW engines.

Dellorto DRLA VW tech book

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch