Dellorto PHB and PHBE Carburetor Parts
Dellorto PHB and PHBE Carburetor Parts

Dellorto PHB and PHBE Parts

Dellorto PHB and PHBE Carburetor Parts.

On this page you will find parts for the Dellorto PHB and PHBE range carburetors.

Click HERE for an exploded view drawing of the Dellorto PHBE and PHB.
The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Click HERE for instructions on how to set the float level of the Dellorto PHB and PHBE.

Click HERE for the specifications of the K and U series needles used on these carburetors.

Please click HERE for a brief explanation of the throttle slides as used in these tapered-needle-type carburetors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto PHB and PHBE Carburetor Parts

!
8553
(1) Throttle Slide for Dellorto PHB carburetors - early type

(1) Throttle Slide for Dellorto PHB carburetors - early type

This is the early type throttle slide for the Dellorto PHB carburetors.

Please note that there MANY different version of slides available for these carburetors and that choosing the correct one is of the utmost importance.

Please click HERE for a brief explanation of the slides.

Currently available in version 50/1.

Please contact us by email if you require this slide in different versions as not all versions are still available.

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHB carburetors - early type

8530
(2) K Series Needle for Dellorto PHB and PHBE carburetors

(2) K Series Needle for Dellorto PHB and PHBE carburetors

K-series needle for the Dellorto PHB and PHBE carburetors.

We only supply original Dellorto needles, marked with the famous diamond-shaped "Inc" logo.

In stock in version:

  • K1
  • K2
  • K3
  • K4
  • K9
  • K13
  • K31
  • K51

Can be supplied in virtually any other version but please contact us by email for that.

Required quantity per carburettor: 1

This is item number 2 in the drawing.

Click HERE for the specifications of the K and U series needles used on these carburetors.

(2) K Series Needle for Dellorto PHB and PHBE carburetors

8540
(3) AB Series Atomiser for Dellorto PHB and PHBE carburetors

(3) AB Series Atomiser for Dellorto PHB and PHBE carburetors

AB-series atomiser for the Dellorto PHB and PHBE carburetors.

We only supply original Dellorto atomisers, marked with the famous diamond-shaped "Inc" logo.

In stock in version:

  • AB262
  • AB264
  • AB265
  • AB266
  • AB268

Can be supplied in virtually any other version but please contact us by email for that.

Required quantity per carburettor: 1

This is item number 3 in the drawing.

(3) AB Series Atomiser for Dellorto PHB and PHBE carburetors

6413
(4) Main Jet for Dellorto PHB and PHBE carburetors

(4) Main Jet for Dellorto PHB and PHBE carburetors

Main jet for the Dellorto PHB and PHBE carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

In stock in sizes:

  • 52
  • 54
  • 56
  • 58
  • 60
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 105
  • 108
  • 110
  • 115
  • 118
  • 120
  • 125
  • 130
  • 135
  • 140
  • 145
  • 150
  • 155
  • 160
  • 165
  • 170
  • 172
  • 175
  • 180
  • 182
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 4 in the drawing.

(4) Main Jet for Dellorto PHB and PHBE carburetors

1486
(5) Idle Jet for Dellorto PHB and PHBE carburetors

(5) Idle Jet for Dellorto PHB and PHBE carburetors

Factory original idle jet for the Dellorto PHB and PHBE carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available from our stock in sizes:

  • 33
  • 35
  • 40
  • 45
  • 48
  • 50
  • 53
  • 55
  • 58
  • 60
  • 62
  • 65
  • 67
  • 72
  • 80
  • 82
  • 84
  • 86
  • 88
  • 90
  • 118
  • 120

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 5 in the drawing.

(5) Idle Jet for Dellorto PHB and PHBE carburetors

7746
(6) Choke or Starter Jet for Dellorto PHB and PHBE carburetors

(6) Choke or Starter Jet for Dellorto PHB and PHBE carburetors

Choke (or starter) jet for the Dellorto PHB and PHBE carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available from stock in size:

  • 45
  • 50
  • 55
  • 60
  • 65
  • 70
  • 75
  • 80
  • 85
  • 90
  • 100

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) Choke or Starter Jet for Dellorto PHB and PHBE carburetors

NV
(7) Genuine Viton-Tipped Needle Valve Assembly for Dellorto PHBE and PHB carburetors

(7) Genuine Viton-Tipped Needle Valve Assembly for Dellorto PHBE and PHB carburetors

Dellorto needle valve, seat and fiber washer for the PHBE and PHB carburetors.

Genuine Dellorto part, Viton-tipped!

Only genuine Dellorto needles are marked with the diamond shaped "Inc" logo!

Available in size:

  • 150
  • 170
  • 200
  • 225
  • 250
  • 270
  • 300
  • 350
  • 400

Required quantity per carburettor: 1

This is item number 7 in the drawing.

(7) Genuine Viton-Tipped Needle Valve Assembly for Dellorto PHBE and PHB carburetors

7450
(8) Double Float for Dellorto PHBE carburetors

(8) Double Float for Dellorto PHBE carburetors

This is the, double, float for the Dellorto PHBE carburetors.

Originally, these came only in the early style, black, version with metal linking arm but these are being phased out in favor of the, new, white version.

Please choose the replacement for your defective float according to the part-number on your original.

Available in the following versions:

  • 7450.1 8.5 gram white - replaces 7450.1 10 gram black
  • 7450.2 12.5 gram white - replaces 7450.2 14 gram black
  • 7450.3 7.5 gram black (only 1 left in stock!)
  • 7450.3 6,5 gram white - replaces 7450.3 7.5 gram black

Required quantity per carburettor: 1

This is item number 8 in the drawing.

(8) Double Float for Dellorto PHBE carburetors

1476A
(9) Rubber Cable Boot for Dellorto PHB and PHBE carburetors

(9) Rubber Cable Boot for Dellorto PHB and PHBE carburetors

Rubber cable cap for the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 2 (1 x for throttle cable, 1 x for choke cable)

This is item number 9 in the drawing.

 

 

(9) Rubber Cable Boot for Dellorto PHB and PHBE carburetors

1104
(10) Cable Adjuster for Dellorto PHB and PHBE carburetors

(10) Cable Adjuster for Dellorto PHB and PHBE carburetors

Cable adjuster for the Dellorto PHBE and PHB series carburetors.

In case of a cable operated choke, this cable adjuster uses Lock Nut 1691 to secure its setting.

For your convenience you can order a new lock nut right along with the adjuster by simply selecting it through the drop-box above.

Required number per carburettor: depending on your set-up

This is item number 10 in the drawing.

(10) Cable Adjuster for Dellorto PHB and PHBE carburetors

1691
(11) Lock Nut for Choke Cable Adjuster on Dellorto PHB and PHBE carburetors

(11) Lock Nut for Choke Cable Adjuster on Dellorto PHB and PHBE carburetors

Lock nut that secures the setting of the choke cable adjuster on the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 11 in the drawing.

 

 

 

(11) Lock Nut for Choke Cable Adjuster on Dellorto PHB and PHBE carburetors

8542
(12) Top Cover Screw Bolt for Dellorto PHB and PHBE carburetors

(12) Top Cover Screw Bolt for Dellorto PHB and PHBE carburetors

Screw / Bolt that secures the top cover on the Dellorto PHBE series carburetors.

Required quantity per carburettor: 2

This is item number 12 in the drawing.

 

 

 

(12) Top Cover Screw Bolt for Dellorto PHB and PHBE carburetors

7745
(14) Choke Assembly Support Screw for Dellorto PHB and PHBE carburetors

(14) Choke Assembly Support Screw for Dellorto PHB and PHBE carburetors

Screw that secures the choke assembly to the body of the carburetor on the Dellorto PHB and PHBE series carburetors.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

 

 

 

(14) Choke Assembly Support Screw for Dellorto PHB and PHBE carburetors

8295
(15) Choke Assembly Support for Dellorto PHB and PHBE carburetors

(15) Choke Assembly Support for Dellorto PHB and PHBE carburetors

Choke assembly for the Dellorto PHB and PHBE series carburetors.

Required quantity per carburettor: 1

This is item number 15 in the drawing.

 

 

 

(15) Choke Assembly Support  for Dellorto PHB and PHBE carburetors

8297
(16) O Ring for Choke Assembly Support for Dellorto PHB and PHBE carburetors

(16) O Ring for Choke Assembly Support for Dellorto PHB and PHBE carburetors

Rubber (Viton) O-ring to seal the choke assembly on the Dellorto PHB and PHBE series carburetors.

Required quantity per carburettor: 1

This is item number 16 in the drawing.

 

 

(16) O Ring for Choke Assembly Support for Dellorto PHB and PHBE carburetors

3133
(17) Choke Return Spring for Dellorto PHB and PHBE carburetors

(17) Choke Return Spring for Dellorto PHB and PHBE carburetors

Choke return spring for the Dellorto PHB and PHBE series carburetors.

Required quantity per carburettor: 1

This is item number 17 in the drawing.

 

 

(17) Choke Return Spring for Dellorto PHB and PHBE carburetors

3238
(18) Choke Piston for Dellorto PHB and PHBE carburetors

(18) Choke Piston for Dellorto PHB and PHBE carburetors

Choke piston for the Dellorto PHBE and PHB series carburetors.

Required quantity per carburettor: 1

This is item number 18 in the drawing.

 

 

 

 

(18) Choke Piston for Dellorto PHB and PHBE carburetors

SlideSpring
(19) Internal Slide Spring for Dellorto PHB and PHBE carburetors

(19) Internal Slide Spring for Dellorto PHB and PHBE carburetors

Internal Slide Spring for the Dellorto PHBE and PHB series carburetors.

Available in 3 settings:

  • Weak: Free length 125 mm, Wire diameter 1.12 mm, Spring diameter 20 mm, Number of turns 19
  • Medium: Free length 132 mm, Wire diameter 1.20 mm, Spring diameter 20 mm, Number of turns 19
  • Strong: Free length 137 mm, Wire diameter 1.25 mm, Spring diameter 20 mm, Number of turns 17

Required quantity per carburettor: 1

This is item number 19 in the drawing.

(19) Internal Slide Spring for Dellorto PHB and PHBE carburetors

8525
(20) Needle Circlip for Dellorto PHBE and PHB carburetors

(20) Needle Circlip for Dellorto PHBE and PHB carburetors

Circlip to secure the needle on Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 20 in the drawing.

 

 

 

(20) Needle Circlip for Dellorto PHBE and PHB carburetors

8533
(21) Top Cover O-Ring for Dellorto PHBE and PHB carburetors

(21) Top Cover O-Ring for Dellorto PHBE and PHB carburetors

Rubber (Viton) o-ring to seal the top cover on the Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 21 in the drawing.

 

 

 

(21) Top Cover O-Ring for Dellorto PHBE and PHB carburetors

7449
(22) Mixture screw for Dellorto PHBE and PHB carburetors

(22) Mixture Screw for Dellorto PHBE and PHB carburetors

Mixture screw for the Dellorto PHBE and PHB carburetors.

Total length: 33 mm

Tip length: 2.5 mm

Parallel shaft length: 17.4 mm

Required quantity per carburettor: 1

This is item number 22 in the drawing.

(22) Mixture screw for Dellorto PHBE and PHB carburetors

7446
(23) Mixture Screw Spring for Dellorto PHBE and PHB carburetors

(23) Mixture Screw Spring for Dellorto PHBE and PHB carburetors

Mixture Screw Spring for the Dellorto PHBE and PHB carburetors.

Spring that secures the setting of the mixture screw on these carburettor.

Required quantity per carburettor: 1

This is item number 23 in the drawing.

 

(23) Mixture Screw Spring for Dellorto PHBE and PHB carburetors

8260
(24) Mixture screw spring washer for Dellorto PHBE and PHB carburetors

(24) Mixture Screw Spring Washer for Dellorto PHBE and PHB carburetors

Washer that keeps the mixture screw spring in place on the Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 24 in the drawing.

 

(24) Mixture screw spring washer for Dellorto PHBE and PHB carburetors

8678
(25) O-Ring for mixture screw on Dellorto PHBE and PHB carburetors

(25) O-Ring for Mixture Screw on Dellorto PHBE and PHB carburetors

Viton (rubber) O-Ring for mixture screw on Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 25 in the drawing.

 

 

(25) O-Ring for mixture screw on Dellorto PHBE and PHB carburetors

4650
(28) Idle Screw Washer for Dellorto PHB and PHBE carburetors

(28) Idle Screw Washer for Dellorto PHB and PHBE carburetors

Idle Screw Washer for the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 28 in the drawing.

 

 

(28) Idle Screw Washer for Dellorto PHB and PHBE carburetors

7540
(29) Throttle Stop Screw O ring for Dellorto PHB and PHBE carburetors

(29) Throttle Stop Screw O ring for Dellorto PHB and PHBE carburetors

Viton O-ring to seal the throttle stop screw on the Dellorto PHB and PHBE carburetors.

Required quantity per carburetor: 1

This is item number 29 in the drawing.

 

(29) Throttle Stop Screw O ring for Dellorto PHB and PHBE carburetors

6109
(30) Banjo Fuel Filter for Dellorto PHB and PHBE carburetors

(30) Banjo Fuel Filter for Dellorto PHB and PHBE carburetors

Special fuel filter to fit the banjo fuel bolt of the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 30 in the drawing.

 

(30) Banjo Fuel Filter for Dellorto PHB and PHBE carburetors

7890
(31) 8 mm Double Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

(31) 8 mm Double Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

This is the, TWIN, metal fuel inlet banjo for the Dellorto PHB and PHBE carburetors for 8 mm fuel lines.

This double metal version which uses fiber washer number 4052.

This double metal version which uses banjo bolt 4568.

For your convenience, you can order this inlet banjo complete with fiber washer and banjo bolt or simply without these extras.

Required quantity per carburettor: 1

This is item number 31 in the drawing.

This banjo uses fuel line with an internal diameter of 8 mm.

(31) 8 mm Double Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

4052
(32) Banjo Bolt Fiber Washer for Dellorto PHB and PHBE carburetors

(32) Banjo Bolt Fiber Washer for Dellorto PHB and PHBE carburetors

Banjo bolt fiber washer for the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 32 in the drawing.

 

 

(32) Banjo Bolt Fiber Washer for Dellorto PHB and PHBE carburetors

4568
(33) Long Fuel Banjo Bolt for Dellorto PHB and PHBE carburetors

(33) Long Fuel Banjo Bolt for Dellorto PHB and PHBE carburetors

Fuel banjo bolt for the Dellorto PHB and PHBE carburetors with 8 mm pipe fitting banjos only.

This bolt has an overall length of some 21 mm with a shaft length of approximately 17.5 mm and will NOT fit the banjos for 6 mm fuel lines.

Required quantity per carburettor: 1

This is item number 33 in the drawing.

 

(33) Long Fuel Banjo Bolt for Dellorto PHB and PHBE carburetors

6288
(34) Fiber Ring for the Needle Valve on the Dellorto PHB and PHBE carburetors

(34) Fiber Ring for the Needle Valve on the Dellorto PHB and PHBE carburetors

Fiber ring to seal the needle valve on the Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 34 in the drawing.

 

 

(34) Fiber Ring for the Needle Valve on the Dellorto PHB and PHBE carburetors

6173
(35) O-Ring for starter jet of Dellorto PHBE and PHB carburetors

(35) O-Ring for starter jet of Dellorto PHBE and PHB carburetors

O-Ring for the starter jet of the Dellorto PHBE and PHB carburetors.

Required quantity per carburettor: 1

This is item number 35 in the drawing.

 

 

(35) O-Ring for starter jet of Dellorto PHBE and PHB carburetors

8885 - 8552
(36) Main Jet Holder for Dellorto PHBE and PHB carburetors

(36) Main Jet Holder for Dellorto PHBE and PHB carburetors

This is the main jet holder for the Dellorto PHBE and PHB carburetors.

Please note that there are TWO different versions available which are NOT interchangeable!

The available versions are:

  1. 8885 - 17 MM tall
  2. 8552 - 20 MM tall

Required quantity per carburettor: 1

This is item number 36 in the drawing.

(36) Main Jet Holder for Dellorto PHBE and PHB carburetors

7346
(37) Float Pivot Pin for Dellorto PHB and PHBE carburetors

(37) Float Pivot Pin for Dellorto PHB and PHBE carburetors

Standard float pivot pin for the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 37 in the drawing.

 

 

 

(37) Float Pivot Pin for Dellorto PHB and PHBE carburetors

7451
(38) Float Bowl O-Ring for Dellorto PHB and PHBE carburetors

(38) Float Bowl O-Ring for Dellorto PHB and PHBE carburetors

Float bowl o-ring / rubber gasket for the Dellorto PHB and PHBE carburetors.

Required quantity per carburettor: 1

This is item number 38 in the drawing.

 

 

(38) Float Bowl O-Ring for Dellorto PHB and PHBE carburetors

4057
(40) 17 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

(40) 17 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

Float bowl nut seal for the Dellorto PHB and PHBE carburetors.

Fits the 17 mm varieties of that special nut:

Required quantity per carburettor: 1

This is item number 40 in the drawing.

(40) 17 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

9676
(41) 17 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

(41) 17 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

Special Nut / Drain Plug for the float bowl on the Dellorto PHBE and PHB carburetors.

Please note: there is a total of 3 different plugs available which are NOT interchangeable.

These are most easily identified by the spanner size needed for them.

This particular version requires a 17mm spanner.

This nut uses seal 4057 to seal against the float bowl.

For your convenience, you can order a new seal right along with the nut by simply selecting it through the drop box.

Required quantity per carburettor: 1

This is item number 41 in the drawing.

(41) 17 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

4570
Fiber Seal for Float Bowl Plug on Dellorto PHBE and PHB carburetors

Fiber Seal for Float Bowl Plug on Dellorto PHBE and PHB carburetors

Fiber seal for the float bowl nut with Drain Facility on the Dellorto PHBE and PHB series carburetors.

Is used on float bowl nut 9973 with drain plug 9812.

Required quantity per carburettor when equipped with appropriate drain plug: 1

This item number is NOT in the drawing.

Fiber Seal for Float Bowl Plug on Dellorto PHBE and PHB carburetors

9250
(42) Plastic Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

(42) Plastic Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

Plastic fuel inlet banjo for the Dellorto PHB and PHBE carburetors.

Please note that there are various versions of this inlet banjo: a single metal one, a double metal one and this single plastic version which does NOT use a fiber washer.

For your convenience, you can order this inlet banjo complete with banjo bolt or without it.

Required quantity per carburettor: 1

This is item number 42 in the drawing.

This banjo uses fuel line with an internal diameter of 8 mm.

(42) Plastic Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

8293
(43) Lever-Operated Choke Mechanism for Dellorto PHB and PHBE carburetors - Long

(43) Lever-Operated Choke Mechanism for Dellorto PHB and PHBE carburetors - Long

Lever-operated choke mechanism for the Dellorto PHBE and early PHB carburetors.

Please note that the working height of this version is 41 mm.

There is also a short version available which is 34 mm.

Please make sure that this is the correct version for your carburetor.

Required quantity per carburettor: 1

This is item number 43 in the drawing.

(43) Lever-Operated Choke Mechanism for Dellorto PHB and PHBE carburetors - Long

8294
(43) Lever-Operated Choke Mechanism for Dellorto PHBE carburetors - Short

(43) Lever-Operated Choke Mechanism for Dellorto PHBE carburetors - Short

Lever-operated choke mechanism for the Dellorto PHBE carburetors.

Please note that the working height of this version is 34 mm.

There is also a long version available which is 41 mm.

Please make sure that this is the correct version for your carburetor.

Required quantity per carburettor: 1

This is item number 43 in the drawing.

(43) Lever-Operated Choke Mechanism for Dellorto PHBE carburetors - Short

8680
(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

18 millimeter long trumpet for the Dellorto PHB and PHBE carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

 

 

(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

11248
(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

30 millimeter long trumpet for the Dellorto PHB and PHBE carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

 

 

(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

6273
(45) 8 mm Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

(45) 8 mm Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

Metal fuel inlet banjo for the Dellorto PHB and PHBE carburetors with 8 mm fuel union.

For your convenience, you can order this inlet banjo complete with fiber washer and banjo bolt or without it.

Required quantity per carburettor: 1

This is item number 45 in the drawing.

This banjo uses fuel line with an internal diameter of 8 mm.

(45) 8 mm Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

6517
(45) 8 mm Angled Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

(45) 8 mm Angled Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

Angeled, metal fuel inlet banjo for the Dellorto PHB and PHBE carburetors with 8 mm fuel union.

The fuel union is positioned under an angle of approximately 45 degrees. Please see photo.

For your convenience, you can order this inlet banjo complete with fiber washer and banjo bolt or without it.

Required quantity per carburettor: 1

This is item number 45 in the drawing.

This banjo uses fuel line with an internal diameter of 8 mm.

(45) 8 mm Angled Metal Fuel Inlet Banjo for Dellorto PHB and PHBE carburetors

10238
(50) 21 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

(50) 21 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

Special Nut / Drain Plug for the float bowl on the Dellorto PHBE and PHB carburetors.

Please note: there is a total of 3 different plugs available which are NOT interchangeable.

These are most easily identified by the spanner size needed for them.

This particular version requires a 21mm spanner.

This nut uses seal 2778 to seal against the float bowl.

Required quantity per carburettor: 1

This is item number 50 in the drawing.

(50) 21 mm Float Bowl Nut for Dellorto PHB and PHBE carburetors

15760
(52) Single white plastic float for Dellorto PHB and PHBE carburetors

(52) Single white plastic float for Dellorto PHB and PHBE carburetors

Single, white plastic, float for the Dellorto PHB and PHBE carburetors.

Available in the following versions:

  • 15760.3 - 4.0 grams
  • 15760.4 - 5.2 grams
  • 15760.5 - 3.6 grams

Required quantity per carburettor: 2

This is item number 52 in the drawing.

Click HERE for instructions on how to set the float level of the Dellorto PHB and PHBE.

(52) Single white plastic float for Dellorto PHB and PHBE carburetors

9794
(52) Single black plastic float for Dellorto PHB and PHBE carburetors

(52) Single black plastic float for Dellorto PHB and PHBE carburetors

Single, black plastic, float for the Dellorto PHB and PHBE carburetors.

Available in the following versions:

  • 9794.1 - 3.5 gram
  • 9794.3 - 3.5 gram
  • 9794.4 - 4.5 gram
  • 9794.5 - 2.8 gram

Required quantity per carburettor: 2

This is item number 52 in the drawing.

Click HERE for instructions on how to set the float level of the Dellorto PHB and PHBE.

(52) Single black plastic float for Dellorto PHB and PHBE carburetors

2778
(56) 21 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

(56) 21 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

Float bowl nut seal for the Dellorto PHB and PHBE carburetors.

Fits the 21 mm varieties of that special nut:

Required quantity per carburettor: 1

This is item number 40 in the drawing.

(56) 21 mm Float Bowl Nut Seal for Dellorto PHB and PHBE carburetors

52519
(64) Service Kit for Dellorto PHB and PHBE carburetors

(64) Service Kit for Dellorto PHB and PHBE A, B, C, G, S, V or Z carburetors

Dellorto factory-original service kit for the Dellorto PHB and PHBE carburetors with suffix A, B, C, G, S, V or Z.

The suffix can be found on the body of your carburetor.

Contains all required gaskets, seals, rubber boots and o-rings as per the photograph.

Required quantity per carburettor: 1

This is item number 64 in the drawing.

For the other suffixes, please use Service Kit 52546.

(64) Service Kit for Dellorto PHB and PHBE carburetors

52546
(64) Service Kit for Dellorto PHB and PHBE C, H, L, R, P, T or U carburetors

(64) Service Kit for Dellorto PHB and PHBE C, H, L, R, P, T or U carburetors

Dellorto factory-original service kit for the Dellorto PHB and PHBE carburetors with suffix C, H, L, R, P, T or U.

The suffix can be found on the body of your carburetor.

Contains all required gaskets, seals, rubber boots and o-rings as per the photograph.

Required quantity per carburettor: 1

This is item number 64 in the drawing.

For the other suffixes, please use Service Kit 52519.

(64) Service Kit for Dellorto PHB and PHBE C, H, L, R, P, T or U carburetors

9008
Breather Pipe Connection for Dellorto PHBE and PHB carburetors

Breather Pipe Connection for Dellorto PHBE and PHB carburetors

This breather pipe connector will fit a wide range of Dellorto carburetors, amongst which the PHBE and PHB series carburetors.

This pipe has 5 mm push fit in the carburettor body and connects to a 3.8 mm internal diameter breather line.

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Breather Pipe Connection for Dellorto PHBE and PHB carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

Newly arrived Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol / LPG 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Additional Information

  • Kit includes: 14mm Short reach plug and Hexagonal adapter
  • Colortune will fit most vehicles
  • Kit complete with instructions in English
  • Extra adapter sizes available separately

Available in the following basic sizes:

  • 10 mm - Available from our Stock
  • 12 mm - Sold out at the moment !
  • 14 mm - Available from our Stock

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available as long as our limited stock lasts!

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0904
Dellorto Carburatori Sticker - Small - High

Dellorto Carburatori Sticker - Small - High

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 3 cm (2.4 x 1.2 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - High

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 4 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch