Fuel Filters, Pumps and Accessories
Fuel Filters, Pumps and Accessories

Fuel Filters, Pumps and Accessories

On this page you will find the various fuel pumps, fuel filters, pressure regulators, replacement filter elements and accessories that will work fine with your Dellorto, Weber or Solex Carburettors.

!

Fuel Filters, Pumps and Accessories

!
SYTECPL031
Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

Sytec replacement pump for the long obsolete Weber PL-031 fuel pump as used on, amongst others, the 1990 - 1996 Aston Martin Virage and Virage Volante.

The Weber PL031 is no longer produced yet it is a vital part of the car's fuel system.

Systec stepped in and produces this replacement pump in the USA.

Please note: this pump requires a high quality pre-filter to avoid contamination.

Specifications:

  • Fittings In:- Jic 6
  • Fittings Out:- Jic 6
  • Voltage:-12v
  • Flow Ltr/Hr (Max):- 348
  • Flow Ltr/Hr @ 3 Bar (44psi):- 270
  • Flow Ltr/Hr @ 5 Bar (73psi):- 222
  • Location To Tank (Mtrs) 0.6
  • Thread Size:-10x1mm SFT
  • Length (mm):- 160
  • Diameter (mm):- 43
  • Weight (Kg):- 0.46

Limited availability!

Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

SYTECPL031
Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

Here we have a Sytec replacement for the long obsolete Weber PL-031 fuel pump as used on, amongst others, the Ferrari F40.

The Weber PL031 is no longer produced yet it is a vital part of the car's fuel system.

Sytec stepped in and produces this replacement pump in the USA.

Please note: this pump requires a high quality pre-filter to avoid contamination.

Specifications:

  • Fittings In:- Jic 6
  • Fittings Out:- Jic 6
  • Voltage:-12v
  • Flow Ltr/Hr (Max):- 348
  • Flow Ltr/Hr @ 3 Bar (44psi):- 270
  • Flow Ltr/Hr @ 5 Bar (73psi):- 222
  • Location To Tank (Mtrs) 0.6
  • Thread Size:-10x1mm SFT
  • Length (mm):- 160
  • Diameter (mm):- 43
  • Weight (Kg):- 0.46

Limited availability!

Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allow you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets of 3.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for stainless steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

WC99902.057
Inertia Fuel Cut-Off Switch

Inertia Fuel Cut-Off Switch

Webcon electric fuel pump cut-off safety switch.

This inertia switch detects the rapid change in velocity of a vehicle when impacted in any direction and is designed to be wired into the supply of the fuel pump to cut the power to the pump in the event of an accident.

The switch is normally immune to normal road vibration and road irregularities.

Suitable for under-bonnet fitment providing the switch is free from the risk of spillage of liquids or direct water spray.

The installation manual (in English) can be downloaded HERE.

Please note that this is the inertia switch ONLY. In order to wire this switch into you vehicle, you need a connector set which can be purchased separately or ordered right along with the switch by selecting it through the drop box at the top of this description.

Inertia Fuel Cut-Off Switch

WC99902.083
Connector Set for Inertia Fuel Cut-Off Switch

Connector Set for Inertia Fuel Cut-Off Switch

Connector set for our Webcon Inertia Fuel Cut-Off Switch.

This set is required when you wire our Inertia Switch into your vehicle for the first time.

The installation manual (in English) for the Inertia Switch can be downloaded HERE.

 

 

 

Connector Set for Inertia Fuel Cut-Off Switch

WFP509
Airtex 6 Volt Low-Pressure Fuel Pump

Airtex 6 Volt Low-Pressure Fuel Pump

This is a special fuel pump for vehicles with a 6 Volt electrical system.

Thanks to its low output pressure of 4.4 PSI / 0.3 Bar, it usually does not require a pressure regulator but please check your system requirements to make sure.

Pump specification:

  • Flow rate: 8 Gallons/hour - 30 liters/hour
  • Pressure: 4.4 PSI / 0.3 Bar
  • Pipe union thread size: 1/8" NPTF tapered thread
  • Power supply: 6 Volt Negative Earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • In-line fuel filter
  • Mounting bracket and materials
  • 8 mm inlet and outlet unions with fuel hose and hose clips
  • Installation instructions

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Always operate this pump with the proper filter installed as failure to do so will void the warranty!
Replacement filters can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

Airtex 6 Volt Low-Pressure Fuel Pump

WFP502
Airtex 12 Volt Low-Pressure Fuel Pump

Airtex 12 Volt Low-Pressure Fuel Pump

This is a special, low-pressure fuel pump for vehicles with a 12 Volt electrical system.

Thanks to its low pressure of 4.5 PSI / 0.31 Bar, it usually does not require a pressure regulator but please check your system requirements to make sure.

Pump specification:

  • Flow rate: 90 - 130 liters/hour
  • Pressure: 2.5 - 4.5 PSI / 0.17 - 0.31 Bar
  • Pipe union thread size: 1/8" NPTF tapered thread
  • Power supply: 12 Volt Negative Earth
  • Pump Length: 172 mm
  • Pump Diameter: 54 mm
  • Draws a current of some 5 Amps
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

The kit includes:

  • Pump
  • In-line fuel filter
  • Mounting bracket and materials
  • 8 mm inlet and outlet unions with fuel hose and hose clips
  • Installation instructions

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Always operate this pump with the proper filter installed as failure to do so will void the warranty!
Replacement filters can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Airtex 12 Volt Low-Pressure Fuel Pump

SSRK
Facet CUBE Solid State ROAD Fuel Pump Kit

Facet CUBE Solid State ROAD Fuel Pump Kit

Facet Solid State ROAD Fuel Pump Kit.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State ROAD fuel pump is suitable for engines of up to circa 130 HP.

Pump specification:

  • Flow rate 12 Gallons/hour - 45 liters/hour
  • Pressure: 2.5 - 3.0 PSI - 0.17 - 0.20 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • 2 Mounting isolation feet
  • 8 mm Outlet Union
  • Screw-on inlet filter
  • Installation instructions

Please note that failure to operate the pump with a suitable filter voids the warranty!

Replacement filters can be found HERE.

These kits are usually purchased to modify an existing system or to replace an existing mechanical fuel pump.
In case you just want to replace a broken pump of this same type, we advise you to take a look at our Facet CUBE Solid State ROAD Fuel Pump - pump only.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State ROAD Fuel Pump Kit

SSR
Facet CUBE Solid State ROAD Fuel Pump - Pump Only

Facet CUBE Solid State ROAD Fuel Pump - Pump Only

Facet CUBE Solid State ROAD Fuel Pump only.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State ROAD fuel pump is suitable for engines of up to circa 130 HP.

Pump specification:

  • Flow rate 12 Gallons/hour - 45 liters/hour
  • Pressure: 2.5 - 3.0 PSI - 0.17 - 0.20 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Please note that failure to operate the pump with a suitable filter voids the warranty!

Suitable screw-on filters can be found HERE.

Please note: this concerns ONLY the pump body... no further connectors or mounting material!

These single pumps are usually purchased to replace a broken pump.
In case you want to equip your vehicle with such an electrical pump system, we advise you to take a look at our Facet CUBE Solid State ROAD Fuel Pump Kit.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State ROAD Fuel Pump - Pump Only

SSFRK
Facet CUBE Solid State FAST ROAD Fuel Pump Kit

Facet CUBE Solid State FAST ROAD Fuel Pump Kit

Facet Solid State FAST ROAD Fuel Pump Kit.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State FAST ROAD fuel pump is suitable for engines of up to circa 150 HP.

Pump specification:

  • Flow rate 32 Gallons/hour - 120 liters / hour
  • Pressure: 4 - 7 PSI - 0.27 - 0.48 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • 2 Mounting isolation feet
  • 8 mm Outlet Union
  • Screw-on inlet filter
  • Installation instructions

Please note that failure to operate the pump with a suitable filter voids the warranty!

Replacement filters can be found HERE.

These kits are usually purchased to modify an existing system or to replace an existing mechanical fuel pump.
In case you just want to replace a broken pump of this same type, we advise you to take a look at our Facet CUBE Solid State FAST ROAD Fuel Pump - pump only.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State FAST ROAD Fuel Pump Kit

SSFR
Facet CUBE Solid State FAST ROAD Fuel Pump - Pump Only

Facet CUBE Solid State FAST ROAD Fuel Pump - Pump Only

Facet CUBE Solid State FAST ROAD Fuel Pump only.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State FAST ROAD fuel pump is suitable for engines of up to circa 150 HP.

Pump specification:

  • Flow rate 32 Gallons/hour - 120 liters / hour
  • Pressure: 4 - 7 PSI - 0.27 - 0.48 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Please note that failure to operate the pump with a suitable filter voids the warranty!

Suitable screw-on filters can be found HERE.

Please note: this concerns ONLY the pump body... no further connectors or mounting material!

These single pumps are usually purchased to replace a broken pump.
In case you want to equip your vehicle with such an electrical pump system, we advise you to take a look at our Facet CUBE Solid State FAST ROAD Fuel Pump Kit.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State FAST ROAD Fuel Pump - Pump Only

SSCK
Facet CUBE Solid State COMPETITION Fuel Pump Kit

Facet CUBE Solid State COMPETITION Fuel Pump Kit

Facet Solid State COMPETITION Fuel Pump Kit.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State COMPETITION fuel pump is suitable for engines of up to circa 180 HP.

Pump specification:

  • Flow rate 25 Gallons/hour - 95 liters/hour
  • Pressure: 6.0 - 7.0 PSI - 0.41 - 0.48 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • 2 Mounting isolation feet
  • 8 mm Outlet Union
  • Screw-on inlet filter
  • Installation instructions

Please note that failure to operate the pump with a suitable filter voids the warranty!

Replacement filters can be found HERE.

These kits are usually purchased to modify an existing system or to replace an existing mechanical fuel pump.
In case you just want to replace a broken pump of this same type, we advise you to take a look at our Facet CUBE Solid State COMPETITION Fuel Pump - pump only.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State COMPETITION Fuel Pump Kit

SSC
Facet CUBE Solid State COMPETITION Fuel Pump - Pump Only

Facet CUBE Solid State COMPETITION Fuel Pump - Pump Only

Facet CUBE Solid State COMPETITION Fuel Pump only.

Using Facet's proven "CUBE Solid State" technology, the CUBE Solid State COMPETITION fuel pump is suitable for engines of up to circa 180 HP.

Pump specification:

  • Flow rate 25 Gallons/hour - 95 liters/hour
  • Pressure: 6.0 - 7.0 PSI - 0.41 - 0.48 Bar
  • Dry prime height 1 Ft - 0.3 Mtrs
  • Pipe union thread size: 1/8" NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Please note that failure to operate the pump with a suitable filter voids the warranty!

Suitable screw-on filters can be found HERE.

Please note: this concerns ONLY the pump body... no further connectors or mounting material!

These single pumps are usually purchased to replace a broken pump.
In case you want to equip your vehicle with such an electrical pump system, we advise you to take a look at our Facet CUBE Solid State COMPETITION Fuel Pump Kit.

Depending on your vehicle's carburetors and the Facet CUBE pump of your choice, it might be required to use a pressure regulator.
Please check the CUBE specifications against the requirements of your vehicle to be sure.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet CUBE Solid State COMPETITION Fuel Pump - Pump Only

RTWK
Facet GOLD-FLO Red top Competition Fuel Pump Kit

Facet GOLD-FLO Red top Competition Fuel Pump Kit

Facet GOLD-FLO Red top competition fuel pump kit suitable for engines of 200+ BHP.

Pump specification:

  • Flow rate 45 Gallons/hour / 170 liters/hour
  • Pressure: 6.5 - 8 PSI / 0.45 - 0.55 Bar
  • Dry prime height 12 inches / 0.6 Mtrs
  • Pipe union thread size: 1/4 NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • Mounting isolation feet
  • 10 mm Inlet and outlet unions
  • Spare internal filter
  • Terminated earthing wire
  • Installation instructions

Couplings Specifications:
Connection to pump body: 1/4" NPTF tapered thread
Fuel Unions for fuel lines with 10 mm internal diameter

Due to its operating pressure of up to 8 PSI (some 0.55 Bar), the GOLD-FLO Red Top Competition pump usually requires a pressure regulator to prevent your carburetor(s) from flooding but please check your system requirements to make sure.
A variety of pressure regulators can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet GOLD-FLO Red top Competition Fuel Pump Kit

RTW
Facet GOLD-FLO Red Top Competition Fuel Pump - Pump only

Facet GOLD-FLO Red Top Competition Fuel Pump - Pump only

Facet Red Top competition fuel pump, suitable for engines of 200+ BHP.

Pump specification:

  • Flow rate 45 Gallons/hour / 170 liters/hour
  • Pressure: 6.5 - 8 PSI / 0.45 - 0.55 Bar
  • Dry prime height 12 inches / 0.6 Mtrs
  • Pipe union thread size: 1/4 NPTF tapered thread
  • 12 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Please note: this concerns ONLY the pump body... no further connectors or mounting material!

Couplings Specifications:
Connection to pump body: 1/4" NPTF tapered thread

Due to its operating pressure of up to 8 PSI (some 0.55 Bar), the GOLD-FLO Red Top Competition pump usually requires a pressure regulator to prevent your carburetor(s) from flooding but please check your system requirements to make sure.
A variety of pressure regulators can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Facet GOLD-FLO Red Top Competition Fuel Pump - Pump only

476088
Facet GOLD-FLO 24 Volt Fuel Pump - Pump only

Facet GOLD-FLO 24 Volt Fuel Pump - Pump only

Facet 24 Volt fuel pump.

Specifically designed for vehicles and applications with a 24 Volt electrical system.

Pump specification:

  • Flow rate 32 Gallons/hour / 120 liters/hour
  • Pressure: 4 - 5 PSI (0.28 - 0.35 Bar)
  • Dry prime height 12 inches / 0.6 Mtrs
  • Pipe union thread size: 1/4 NPTF tapered thread
  • 24 Volt negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Please note: this concerns ONLY the pump body... no further connectors or mounting material!

Couplings Specifications:
Connection to pump body: 1/4" NPTF tapered thread

It could be that your fuel system operates at a lower pressure than this pump delivers.
If this is the case, it requires a pressure regulator to prevent your carburetor(s) from flooding but please check your system requirements to make sure.
A variety of pressure regulators can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

Facet GOLD-FLO 24 Volt Fuel Pump - Pump only

FPA906

1/8'' Screw-On Fuel Pump Filter

This is a special screw-on fuel filter to be used with a variety of electric fuel pumps.

Failure to operate those pumps with a suitable filter like this usually voids the warranty on the pump!

This filter suits, amongst others, the Airtex 6Volt filter and the range of Solid State fuel filters by Facet.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Union for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

1/8'' Screw-On Fuel Pump Filter

FPA905
Facet Fuel Pump Mounting Kit

Facet Fuel Pump Mounting Kit

Facet Fuel Pump Mounting Kit.

Antivibration mounts + earthing wire for Facet Cube, GOLD-FLO and Interrupter series fuel pumps.

Facet Fuel Pump Mounting Kit

FPA908R
74 Micron Replacement Facet GOLD-FLO Fuel Pump Filter Element

74 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

Replacement Facet Fuel Pump Filter Element in 74 Micron.

Fits the Facet GOLD-FLO and Interrupter series fuel pumps.

Suitable for gasoline and alcohol engines.

For Diesel engines and situations where a higher degree of filtration is required, please use the 200 Micron filter.

 

74 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

FPA908B
200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

Replacement Facet Fuel Pump Filter Element in 200 Micron.

Fits the Facet GOLD-FLO and Interrupter series fuel pumps.

Especially designed for Diesel engines and situations where the standard filter of 74 Micron doesn't suffice.

 

 

200 Micron Replacement Filter Element for Facet GOLD-FLO Fuel Pumps

PKA

Malpassi Petrol King Fuel Pressure Regulator

Malpassi Petrol King Fuel Pressure Regulator.

Ideal when using an electric fuel pump to supply carburettors, eliminates the risk of flooding due to excess pressure.

The Petrol King Fuel Pressure regulator is suitable for most fuels except methanol.

Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).

Mounting bracket and bolts included.

The use of our Superior Quality PTFE tape on the unions is recommended.

It is supplied with fuel line connectors for fuel line with an internal diameter of 8 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes with instructions in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Petrol King Fuel Pressure Regulator

FUELLINEKIT6MM
Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Special Offer -- FREE One-Way-Valve !

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Malpassi Petrol King Fuel Pressure Regulator - 6 mm set with FREE Sytec 6 mm One Way Valve valued at US$ 29.95!

Offer is good as long as the stock lasts!.

Ideal when using an electric fuel pump to supply carburettors, eliminates the risk of flooding due to excess pressure.

The Petrol King Fuel Pressure regulator is suitable for most fuels except methanol.

Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).

Mounting bracket and bolts included.

The use of our Superior Quality PTFE tape on the unions is recommended.

The pressure regulator is supplied with fuel line connectors for fuel line with an internal diameter of 6 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes with instructions in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

FPR014
Malpassi Fuel Pressure Regulator - Injection to Carburetors

Malpassi Fuel Pressure Regulator - Injection to Carburetors

Special Malpassi Fuel Pressure Regulator to convert an injection system to run on carburetors.

Normally, the fuel pressure delivered by the fuel pump on an injection system is way too high to be handled by a normal pressure regulator.

This regulator is especially equipped to handle those pressures and reduce them to a usable level for carbs thus eliminating the need for you to purchase a low-pressure fuel pump.

The regulator uses the exact same lines as your injection system, allowing you to easily revert back to your old set-up when needed.

It can regulate an astounding input pressure of 88 PSI (6 Bar) down to 2 PSI (0.14 Bar).

It comes equipped with a connection for a return line.

It is supplied with fuel line connectors for fuel line with an internal diameter of 8 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes complete with bracket and mounting materials.

Comes with connection schedule in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Fuel Pressure Regulator - Injection to Carburetors

FK67
Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Maximum input pressure: 10 PSI (0.7 Bar)
  • Suitable for engines up to 150 BHP.
  • Clear glass bowl for easy inspection of the condition of the filter element
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 6 mm AND 8 mm fuel lines.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines both with and internal diameter of 6 mm as well as 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

FK67E
Malpassi Filter King 67 MM Replacement Fuel Filter Element

Malpassi Filter King 67 mm Replacement Fuel Filter Element

Replacement element for the 67 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element only.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct element for you.

If it measures 85 millimeter, you need THIS element instead.

Malpassi Filter King 67 MM Replacement Fuel Filter Element

RA005
Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a cast metal bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

 

 

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

RA007
Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Cast Metal. Excellently suited for competition use.
Alternatively, a clear glass bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

FK85
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

FK85/G
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Includes a Sytec Pressure Gauge
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

FK85/T
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with a clear glass bowl that allows to quickly inspect the condition of the filter element.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

FK85E
Malpassi Filter King 85 MM Replacement Fuel Filter Element

Malpassi Filter King 85 mm Replacement Fuel Filter Element

Replacement element for the 85 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element and new spring.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct element for you.

If it measures 67 millimeter, you need THIS element instead.

Malpassi Filter King 85 MM Replacement Fuel Filter Element

RA006
Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a virtually unbreakable cast metal bowl is also available.

Measures 61.5 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

RA008
Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Virtually unbreakable cast metal version. Very well suited for competition use.
Alternatively, a clear glass bowl is also available

Measures 61.1 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

FUELGAUGEKIT
In-Line Fuel Pressure Gauge Kit

In-Line Fuel Pressure Gauge Kit

In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

  • Sytec fuel pressure gauge (0 - 15 PSI / 0 - 1 Bar)
  • Pressure gauge adapter with connections for 8 mm fuel line
  • Brass blanking plug
  • Roll of our Superior Quality PTFE tape
  • 2 Stainless Steel jubilee clips for 8 mm fuel line

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.
A high-pressure set for fuel injection systems is in the making!

Spare, brass, blanking plugs can be found HERE.

In-Line Fuel Pressure Gauge Kit

FPG001
Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar.

Low pressure fuel pressure gauge.

Ideal for setting the pressure on systems with carburettors.

Can be used with the 85mm Filter King filter and pressure regulator or our Fuel Pressure Gauge Adapter.

Range:

  • 0 - 15 PSI
  • 0 - 1 Bar

Thread: 1/8th" tapered NPTF.

Note:
This gauge should only be used for setting-up and then be removed for normal running.
NOT suited for high-pressure (fuel injected) systems!

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

WFR151
Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar.

Ideal for setting the pressure on fuel injection systems.

Glycerin-filled for accurate reading under all circumstances.

Can be used with our Fuel Pressure Gauge Adapter.

Thread: 1/8th" tapered NPTF.

Range:

  • 0 - 120 PSI
  • 0 - 8 Bar

Note:
This gauge should only be used for setting-up and then be removed for normal running.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

FGA100
Fuel Pressure Gauge Adapter

Fuel Pressure Gauge Adapter

In line fuel gauge adapter for pressure gauges with a thread size of 1/8th NPTF.

Suitable for flexible fuel lines with an internal diameter of 8 mm.

Machined from a solid billet of aluminum.

This adapter is supplied with brass blanking plug.

Can be used with the Sytec Low Pressure Fuel Pressure Gauge, the Webcon High Pressure Fuel Pressure Gauge or any other gauge with 1/8" tapered NPTF thread.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Spare, brass, blanking plugs can be found HERE.

Fuel Pressure Gauge Adapter

PRO804
Sytec Pro-Line in-line fuel filter - 6 mm

Sytec Pro-Line in-line fuel filter - 6 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 6 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 6 mm internal diameter

Sytec Pro-Line in-line fuel filter - 6 mm

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

vachose
Cohline Vacuum Hose with 3.5 mm inner diameter

Cohline Vacuum Hose with 3.5 mm inner diameter

This is the top-of-the-line Cohline silicone vacuum hose / line.

Exceptionally well suited for use on the vacuum-advance of distributors.

Also suited as replacement or extension for your Manometer.

This line has a 3.5 mm inner diameter and circa 8 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 5 meters.

Cohline Vacuum Hose with 3.5 mm inner diameter

2134.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

gatestextiel6mm
Gates textile covered fuel line hose with 6 mm inner diameter

Gates textile covered fuel line hose with 6 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 6 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 10 - 12 mm jubilee clips.

Gates textile covered fuel line hose with 6 mm inner diameter

2134.01.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 12 - 14 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

FPA903/B
6 mm Pipe Union with 1/8 NPTF thread

6 mm Pipe Union with 1/8 NPTF thread

Straight 6 mm Pipe Union with 1/8th thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 6 mm.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 6 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

6 mm Pipe Union with 1/8 NPTF thread

FPA904/X
6 mm Pipe Union with 1/4 NPTF thread

6 mm Pipe Union with 1/4 NPTF thread

Brass straight 6 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 6 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 6 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

6 mm Pipe Union with 1/4 NPTF thread

T6
Sytec 6 mm Brass Fuel T-Piece

Sytec 6 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 6 millimeter.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 6 mm Brass Fuel T-Piece

J404
Fuel Line Joiner 6 mm - 6 mm

Fuel Line Joiner 6 mm - 6 mm

Fuel Line Joiner 6 mm - 6 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 6 mm.

Overall length: 42 mm

Adds a mere 8 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 6 mm fuel line.

Fuel Line Joiner 6 mm - 6 mm

J604
Fuel Line Adapter 6 mm - 8 mm

Fuel Line Adapter 6 mm - 8 mm

Metal Fuel Line Adapter 6 mm - 8 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 6 mm and one with an internal diameter of 8 mm.

Overall length: 46 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 6 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 6 mm - 8 mm

99900.630
6 + 8 mm Fuel Return Line T-Piece

6 + 8 mm Fuel Return Line T-Piece

Newly arrived 6 + 8 mm Fuel Return Line T-Piece

Fuel T piece for use where a fuel system requires a fuel return line and the carburettor does not have one fitted.

This particular version has 2 x 8 mm connections and 1 x 6 mm.

It contains a 0.7 mm brass restrictor in the 6 mm leg leading to the fuel return line.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

6 + 8 mm Fuel Return Line T-Piece

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

FUELPIPEPLUG8MM
Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm.

Ideal for blanking unused fuel lines.

We do advise you to use our premium quality jubilee clips to secure your fuel line onto this plug.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Blue Anodized Sytec Fuel Line Plug for 8 mm

FPA903/A
8 mm Pipe Union with 1/8 NPTF thread

8 mm Pipe Union with 1/8 NPTF thread

Straight 8 mm Pipe Union with 1/8th thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

8 mm Pipe Union with 1/8 NPTF thread

FPA904/A
8 mm Pipe Union with 1/4 NPTF thread

8 mm Pipe Union with 1/4 NPTF thread

Brass straight 8 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

8 mm Pipe Union with 1/4 NPTF thread

FPA9011
Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8th tapered thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Sold as a Pair.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

FPA9021/A
Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4th thread for, amongst others, Facet Red Top Fuel Pumps.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Sold as a Pair.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

T8
Sytec 8 mm Brass Fuel T-Piece

Sytec 8 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 8 millimeter.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Brass Fuel T-Piece

99900.630
8 mm Fuel Return Line T-Piece

8 mm Fuel Return Line T-Piece

8 mm Fuel T piece for use where a fuel system requires a fuel return line and the carburettor does not have one fitted.

It contains a 0.7 mm brass restrictor in the leg leading to the fuel return line.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

8 mm Fuel Return Line T-Piece

J606
Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 8 mm.

Overall length: 42 mm

Adds a mere 3 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Fuel Line Joiner 8 mm - 8 mm

J806
Fuel Line Adapter 8 mm - 10 mm

Fuel Line Adapter 8 mm - 10 mm

Metal Fuel Line Adapter 8 mm - 10 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 10 mm.

Overall length: 50 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 10 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 8 mm - 10 mm

J1006
Fuel Line Adapter 8 mm - 12 mm

Fuel Line Adapter 8 mm - 12 mm

Metal Fuel Line Adapter 8 mm - 12 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 12 mm.

Overall length: 53 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this adapter.

Fuel Line Adapter 8 mm - 12 mm

2134.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter

Cohline E10-resistant fuel line hose with 10 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 9.5 mm inner diameter and 15.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 10 mm inner diameter

2134.01.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 9.5 mm inner diameter and 17.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

FPA903/C
10 mm Pipe Union with 1/8 NPTF thread

10 mm Pipe Union with 1/8 NPTF thread

Straight 10 mm Pipe Union with 1/8th thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 10 mm.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 10 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

10 mm Pipe Union with 1/8 NPTF thread

FPA904/B
10 mm Pipe Union with 1/4 NPTF thread

10 mm Pipe Union with 1/4 NPTF thread

Brass straight 10 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 10 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 10 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

10 mm Pipe Union with 1/4 NPTF thread

FPA9022/B
Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 10 mm Pipe Union 90 Degrees with 1/4 thread for, amongst others, Facet Red Top Fuel Pump.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 10 mm.

Sold as a Pair

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 10 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

T10
10 mm Fuel T-Piece

10 mm Fuel T-Piece

Brass Fuel T-Piece for fuel lines with an internal diameter of 10 millimeter.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

 

10 mm Fuel T-Piece

J808
Fuel Line Joiner 10 mm - 10 mm

Fuel Line Joiner 10 mm - 10 mm

Fuel Line Joiner 10 mm - 10 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 10 mm.

Overall length: 49 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 10 mm fuel line.

Fuel Line Joiner 10 mm - 10 mm

2134.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter

Cohline E10-resistant fuel line hose with 12 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 19 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter

2134.01.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 20.5 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

FPA904C
12 mm Pipe Union with 1/4 NPTF thread

12 mm Pipe Union with 1/4 NPTF thread

Brass straight 12 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 12 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 12 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using jubilee clips.

12 mm Pipe Union with 1/4 NPTF thread

67263TS
Roll of Superior Quality PTFE Thread Sealing Tape

Roll of Superior Quality PTFE Thread Sealing Tape

Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.

12 millimeter wide

Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!

As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.

 

 

Roll of Superior Quality PTFE Thread Sealing Tape

FLEXIDRIVER
Gates Flexi Driver tool to tighten Jubilee Clips

Gates Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Gate Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also on hard-to-reach places.

Comes complete with a set of 4 (four!) sockets in the following sizes:

  • 6 mm
  • 7 mm
  • 8 mm
  • 10 mm

Gates Flexi Driver tool to tighten Jubilee Clips