Fuel Line Hoses
Fuel Line Hoses

Fuel Line Hoses

On this page you will find the very best fuel hose lines that we have been able to find for you, often combining the correct, vintage and classic, looks with the highest quality and resistance to aggressive modern fuels.

Fuel Line Hoses

!
vachose
Cohline Vacuum Hose with 3.5 mm inner diameter

Cohline Vacuum Hose with 3.5 mm inner diameter

Newly arrived Cohline Vacuum Hose with 3.5 mm inner diameter

This is the top-of-the-line Cohline silicone vacuum hose / line.

Exceptionally well suited for use on the vacuum-advance of distributors.

Also suited as replacement or extension for your Manometer.

This line has a 3.5 mm inner diameter and circa 8 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 5 meters.

Cohline Vacuum Hose with 3.5 mm inner diameter

gatestextiel6mm
Gates textile covered fuel line hose with 6 mm inner diameter

Gates textile covered fuel line hose with 6 mm inner diameter

Newly arrived Gates textile covered fuel line hose with 6 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 6 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 10 - 12 mm jubilee clips.

Gates textile covered fuel line hose with 6 mm inner diameter

2134.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

2134.01.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter and stainless steel braiding

Cohline E10-resistant fuel line hose with 6 mm inner diameter and stainless steel braiding

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose with stainless steel braiding.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and stainless steel braiding

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

Newly arrived Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and stainless steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and stainless steel braiding

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose with stainless steel braiding.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

Cohline E10-resistant fuel line hose with 8 mm inner diameter and stainless steel braiding

2134.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter

Cohline E10-resistant fuel line hose with 10 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 9.5 mm inner diameter and 15.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 10 mm inner diameter

2134.01.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter and stainless steel braiding

Cohline E10-resistant fuel line hose with 10 mm inner diameter and stainless steel braiding

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose with stainless steel braiding.

This fuel hose has an 9.5 mm inner diameter and 17.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

Cohline E10-resistant fuel line hose with 10 mm inner diameter and stainless steel braiding

2134.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter

Cohline E10-resistant fuel line hose with 12 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 19 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter

2134.01.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter and stainless steel braiding

Cohline E10-resistant fuel line hose with 12 mm inner diameter and stainless steel braiding

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose with stainless steel braiding.

This fuel hose has an 12 mm inner diameter and 20.5 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter and stainless steel braiding

T6
Sytec 6 mm Brass Fuel T-Piece

Sytec 6 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 6 millimeter.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 6 mm Brass Fuel T-Piece

FUELPIPEPLUG8MM
Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm.

Ideal for blanking unused fuel lines.

We do advise you to use our premium quality jubilee clips to secure your fuel line onto this plug.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Blue Anodized Sytec Fuel Line Plug for 8 mm

FPA904/A
8 mm Pipe Union with 1/4 NPTF thread

8 mm Pipe Union with 1/4 NPTF thread

Brass straight 8 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

8 mm Pipe Union with 1/4 NPTF thread

FPA9011
Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8th tapered thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Sold as a Pair.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

T8
Sytec 8 mm Brass Fuel T-Piece

Sytec 8 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 8 millimeter.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Brass Fuel T-Piece

99900.630
8 mm Fuel Return Line T-Piece

8 mm Fuel Return Line T-Piece

8mm Fuel T piece for use where a fuel system requires a fuel return line and the carburettor does not have one fitted.

Contains a brass restrictor in the leg leading to the fuel return line.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

8 mm Fuel Return Line T-Piece

FPA904/B
10 mm Pipe Union with 1/4 NPTF thread

10 mm Pipe Union with 1/4 NPTF thread

Brass straight 10 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 10 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 10 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

10 mm Pipe Union with 1/4 NPTF thread

T10
10 mm Fuel T-Piece

10 mm Fuel T-Piece

Brass Fuel T-Piece for fuel lines with an internal diameter of 10 millimeter.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

 

10 mm Fuel T-Piece

FPA904C
12 mm Pipe Union with 1/4 NPTF thread

12 mm Pipe Union with 1/4 NPTF thread

Brass straight 12 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 12 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 12 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using jubilee clips.

12 mm Pipe Union with 1/4 NPTF thread

J404
Fuel Line Joiner 6 mm - 6 mm

Fuel Line Joiner 6 mm - 6 mm

Fuel Line Joiner 6 mm - 6 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 6 mm.

Overall length: 42 mm

Adds a mere 8 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 6 mm fuel line.

Fuel Line Joiner 6 mm - 6 mm

J606
Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 8 mm.

Overall length: 42 mm

Adds a mere 3 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Fuel Line Joiner 8 mm - 8 mm

J808
Fuel Line Joiner 10 mm - 10 mm

Fuel Line Joiner 10 mm - 10 mm

Fuel Line Joiner 10 mm - 10 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 10 mm.

Overall length: 49 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 10 mm fuel line.

Fuel Line Joiner 10 mm - 10 mm

J604
Fuel Line Adapter 6 mm - 8 mm

Fuel Line Adapter 6 mm - 8 mm

Metal Fuel Line Adapter 6 mm - 8 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 6 mm and one with an internal diameter of 8 mm.

Overall length: 46 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 6 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 6 mm - 8 mm

J806
Fuel Line Adapter 8 mm - 10 mm

Fuel Line Adapter 8 mm - 10 mm

Metal Fuel Line Adapter 8 mm - 10 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 10 mm.

Overall length: 50 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 10 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 8 mm - 10 mm

J1006
Fuel Line Adapter 8 mm - 12 mm

Fuel Line Adapter 8 mm - 12 mm

Metal Fuel Line Adapter 8 mm - 12 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 12 mm.

Overall length: 53 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this adapter.

Fuel Line Adapter 8 mm - 12 mm

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

P8
Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

P clips are used extensively in many industries for securing pipes, hoses and cables.

The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibility of chafing or damage to the surface of the component being clamped, and of course they can be used without liner should you so desire.

The liner also absorbs vibration and prevents water penetration into the clamping area, with the added advantage of accommodating size variations due to temperature changes.

EPDM is chosen for its resistance to oils, greases and wide temperature tolerances.

The P Clip band has a special strengthening rib which keeps the clip flush to the bolted surface.

The fixings holes are pierced to accept a standard M6 bolt, with the lower hole being elongated to allow for any adjustment that may be necessary when lining up the fixing holes.

The bandwidth is 12.7mm (1/2") with an 6 mm fixing hole.

This P-clip is specifically designed to pipes and lines with an external diameter of around 8 millimeter.

Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

P12
Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe

Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe

P clips are used extensively in many industries for securing pipes, hoses and cables.

The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibility of chafing or damage to the surface of the component being clamped, and of course they can be used without liner should you so desire.

The liner also absorbs vibration and prevents water penetration into the clamping area, with the added advantage of accommodating size variations due to temperature changes.

EPDM is chosen for its resistance to oils, greases and wide temperature tolerances.

The P Clip band has a special strengthening rib which keeps the clip flush to the bolted surface.

The fixings holes are pierced to accept a standard M6 bolt, with the lower hole being elongated to allow for any adjustment that may be necessary when lining up the fixing holes.

The bandwidth is 12.7mm (1/2") with an 6 mm fixing hole.

This P-clip is specifically designed to pipes and lines with an external diameter of around 12 millimeter.

Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allow you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets of 3.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for stainless steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee7-9
7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 7 and 9 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee8-10
8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 8 and 10 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee9-11
9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 9 and 11 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee14-16
14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp 14 - 16 mm for 10 mm Flexible Fuel Line.

Neatly finished, this stainless steel (Grade 304) hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 14 and 16 mm external hose diameter with 10 mm internal diameter.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-17
15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 15 - 17 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee16-18
16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

Newly arrived 16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 16 and 18 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-27
15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Newly arrived 15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Zinc Plated Jubilee Clip Hose Clamp 15 - 27 mm for 12 mm internal diameter Flexible Fuel Line.

Neatly finished, this zinc-plated hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 15 and 27 mm external hose diameter with 12 mm internal diameter.

Can be tightened using a 6 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

FLEXIDRIVER
Gates Flexi Driver tool to tighten Jubilee Clips

Gates Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Gate Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also on hard-to-reach places.

Comes complete with a set of 4 (four!) sockets in the following sizes:

  • 6 mm
  • 7 mm
  • 8 mm
  • 10 mm

Gates Flexi Driver tool to tighten Jubilee Clips