SU Carburetter Service Kits

SU Carburetter Service Kits
SU Carburetter Service Kits

SU Carburetter Service Kits.

On this page you will find all currently available service kits for SU carburettors.

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, on this page you will find what what are called "Service Kits".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, we will create separate pages.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed as there is a good chance that we can help you anyway.

Also in case of any other questions, please don't hesitate to contact us, we'll gladly help you.
Our Contact Page can be found HERE.

SU Carburetter Service Kits

CSK59 SU Carburetter Service Kit for 2 x HS2 or HS4 carburetors

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 and HS4 series carburetors as fitted to a myriad of vehicles over time.

Contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 or HS4 carburetors

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Austin Morris 1300 GT

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Austin Morris 1300 GT
    1969 - 1971
    1275 cc
    Tags: AUD344L and AUD344R
  • Austin Morris 1300 GT
    1971
    1275 cc
    Tags: AUD431L and AUD431R
  • Austin Morris 1300 GT
    1971 - 1972
    1275 cc
    Tags AUD454L and AUD454R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Austin Morris 1300 GT

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Austin Allegro 1300 GT

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1971 - 1972 Austin Allegro 1300 GT
    1275 cc
    Tags: AUD496L and AUD496R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Austin Allegro 1300 GT

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti IM3 1100

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti IM3 1100
    1963 - 1964
    1098 cc
    Tags: AUD132L and AUD132R
  • Innocenti IM3 1100
    1964
    1098 cc
    Tags: AUD160L and AUD160R
  • Innocenti IM3 1100
    1970 - 1971
    1098 cc
    Tags: AUD490L and AUD490R
  • Innocenti IM3 1100
    1971 - 1972
    1098 cc
    Tags: AUD532L and AUD532R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti IM3 1100

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini 1000

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti Mini 1000
    1968 - 1969
    998 cc
    Tags: AUD324L and AUD324R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini 1000

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini 1300 ECE

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti Mini 1300 E.C.E.
    1972
    1275 cc
    Tags: AUD534L and AUD534R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini 1300 ECE

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini Clubman

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti Mini Clubman
    1970 - 1971
    998 cc
    Tags: AUD365L and AUD365R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Mini Clubman

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Regent 1300

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti Regent 1300
    1974
    1275 cc
    Tags: AUD534L and AUD534R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Regent 1300

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Regent 1500

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Innocenti Regent 1500
    1974
    1498 cc
    Tags: AUD633L and AUD633R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Innocenti Regent 1500

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper 1000

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Mini Cooper 1000
    1961 - 1962
    998 cc
    Tags: AUD15L and AUD15R
  • Mini Cooper 1000
    1964 - 1969
    998 cc
    Tags: AUD104L and AUD104R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper 1000

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1000

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Mini Cooper S 1000
    1964
    970 cc
    Tags: AUD151L and AUD151R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1000

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1100

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Mini Cooper S 1100
    1963 - 1964
    1070 cc
    Tags: AUD99L and AUD99R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1100

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1275

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • Mini Cooper S 1275
    1964 - 1970
    1275 cc
    Tags: AUD146L and AUD146R
  • Mini Cooper S 1275
    1970 - 1971
    1275 cc
    Tags: AUD440L and AUD440R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Mini Cooper S 1275

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Morris Marina 1.8 Litre

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS4 carburetors as fitted to, amongst others, the:

  • 1971 - 1972 Morris Marina 1.8 Litre TC
    1798 cc
    Tags: AUD445F en AUD445R
  • 1971 - 1972 Morris Marina 1.8 Litre TC Automatic
    1798 cc
    Tags: AUD464F en AUD464R
  • 1972 - 1974 Morris Marina 1.8 Litre TC E.C.E.
    1798 cc
    Tags: AUD543F en AUD543R
  • 1973 - 1974 Morris Marina 1.8 Litre TC E.C.E. Automatic
    1798 cc
    Tags: AUD673F en AUD673R
  • 1974 Morris Marina 1.8 Litre TC E.C.E.
    1798 cc
    Tags: AUD1013F en AUD1013R
  • 1974 Morris Marina 1.8 Litre TC E.C.E. Automatic
    1798 cc
    Tags: AUD1014F en AUD1014R
  • 1976 - 1979 Morris Marina 1.8 Litre TC
    1798 cc
    Tags: AUD1203F en AUD1203R
  • 1976 - 1979 Morris Marina 1.8 Litre TC Automatic
    1798 cc
    Tags: AUD1283F en AUD1283R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Morris Marina 1.8 Litre

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Reliant Sabre

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS4 carburetors as fitted to, amongst others, the:

  • 1963 - 1963 Reliant Sabre
    4-Cilinder Ford Zephyr Engine
    Tags: AUD118F en AUD118R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Reliant Sabre

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Reliant Scimitar

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS4 carburetors as fitted to, amongst others, the:

  • 1965 - 1966 Reliant Scimitar
    2.5 Litre 6-cilinder in line engine
    Tags: AUD161C en AUD161R

This set contains all required parts to service 2 carburetters.

Please note that this service kit covers the Center and Rear carburetors on this engine.
For the Front carburetor, please use Sevice Kit CSK 39.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS4 carburetors for Reliant Scimitar

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Riley Kestrel 1100

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1965 - 1966 Riley Kestrel 1100
    1098 cc
    Tags: AUD69L en AUD69R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Riley Kestrel 1100

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Riley Kestrel MKII

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1968 Riley Kestrel MKII
    1275 cc
    Tags: AUD318L en AUD318R
  • 1968 - 1969 Riley Kestrel MKII
    1275 cc
    Tags: AUD344L en AUD344R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Riley Kestrel MKII

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Universal Power Drives Unipower

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1964 - 1969 U.P.D. Unipower 4-Cylinder
    998 cc
    Tags: AUD104L en AUD104R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Universal Power Drives Unipower

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1100

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1964 Vanden Plas Princess 1100
    1098 cc
    Tags: AUD69L en AUD69R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1100

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1300

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1968 - 1969 Vanden Plas Princess 1300
    1275 cc
    Tags: AUD318L en AUD318R
  • 1968 - 1969 Vanden Plas Princess 1300
    1275 cc
    Tags: AUD344L en AUD344R
  • 1971 Vanden Plas Princess 1300
    1275 cc
    Tags: AUD431L en AUD431R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1300

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1300 ECE

Add to cart
CSK 59

Factory-Original Service Kit for the 1½ inch SU HS2 carburetors as fitted to, amongst others, the:

  • 1971 - 1972 Vanden Plas Princess 1300 E.C.E.
    1275 cc
    Tags: AUD454L en AUD454R
  • 1971 - 1972 Vanden Plas Princess 1300 E.C.E.
    1275 cc
    Tags: AUD496L en AUD496R

This set contains all required parts to service 2 carburetters.

Consists, amongst others, of the following parts:

  • Various versions of airfilter gaskets
  • Various versions of inlet manifold gaskets
  • 2 Needle & Seat sets
  • 2 Float Spindles
  • Various O-Rings
  • 2 Jet Springs
  • 2 Float Lid Gaskets
  • 2 Tab Washers
  • 1 x R.H. Jet Assembly .090 inch - Identifying Sleeve Color: Green
  • 1 x L.H. Jet Assembly .090 inch - Identifying Sleeve Color: Pink
  • Damper Cap Washer

Please note that for SU, we are sticking to the nomenclature that SU themselves also use. Hence, this is officially called a "Service Kit".

For the less elaborate Gasket Kits and more elaborate Rebuild Kits, please contact us by email, we will gladly help you.

CSK59 SU Carburetter Service Kit for 2 x HS2 carburetors for Vanden Plas Princess 1300 ECE

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Add to cart
HAYNES1575

Written for the do-it-yourselfer and good enough for the professional!

Table of contents:

  • Introduction
  • Chapter 1: Basic carburetion
  • Chapter 2: Carburetor fitting
  • Chapter 3: Maintenance and servicing
  • Chapter 4: Overhaul
  • Chapter 5: Converting to Weber carburetors
  • Chapters 6 -13: Specific Weber carburetors
  • Chapters 14-16: Specific Zenith Stromberg carburetors
  • Chapters 17-21: Specific SU carburetors

It covers the theory, specifications, fault diagnosis, repairs and service adjustments on the following carburettors:

  • Weber DAF
  • Weber DCD
  • Weber DFA
  • Weber DFV
  • Weber DFD
  • Weber DFE
  • Weber DFM
  • Weber DFT
  • Weber DGV
  • Weber DIF
  • Weber IDA
  • Weber IDF
  • Weber IDS
  • Weber IDT
  • Weber DCNF
  • Weber DCOE
  • Weber DFAV
  • Weber DFTA
  • Weber DGAS
  • Weber DGAV
  • Weber IDAP
  • Weber IDTP
  • Zenith Stromberg CD “constant depression” carburetors
  • Zenith Stromberg CD
  • Zenith Stromberg CDS
  • Zenith Stromberg CDS-2
  • Zenith Stromberg CDSE
  • Zenith Stromberg CD-2E
  • Zenith Stromberg CDST
  • Zenith Stromberg CDSET
  • SU type H
  • SU type HD
  • SU type HS
  • SU type HIF (including electronic) carburetors and auxiliary starting devices

Some 352 pages that cover the adjusting, tuning and overhauling of the above mentioned carburetors.

Contains step-by-step instructions and Haynes Hints.

Language: English

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Synchrometer airflow meter for carburetors

Add to cart
SYNCHRONOMETER

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

Synchrometer airflow meter for carburetors

Synchrometer adaptor for SU carburettors

Add to cart
SYNCHRONOMETERSU

Synchrometer adapter to suit SU and Stromberg carburettors.

Cone dimensions: 30mm - 40mm.

Internal diameter of the hole through the middle: 25mm.

 

 

 

Synchrometer adaptor for SU carburettors

Synchrometer adapter for SU HD and HS8 carburetors

Add to cart
SYNC ADAPT 28

Synchrometer adapter to suit SU HD and SU HS8 carburetors.

Approximately 52 mm outside diameter at carburettor end.

Angled at 45 degrees.

42 mm internal diameter.

 

 

Synchrometer adapter for SU HD and HS8 carburetors

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Add to cart
flexoid5xa4

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Sytec Fuel Line One Way Valve

Add to cart
OWV

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

Carburettor Jet Gauges

Add to cart
jet sizer

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

Jet size gauge 0.5 to 1.5 mm

Add to cart
JSG01

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

54-Piece Jet Drill Set

Add to cart
JDK01

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

16-Piece Jet Reamer Set

Add to cart
JET REAMER

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

Gunson Colortune See Through Spark Plug Kit

Add to cart
G4074

Gunson Colortune See Through Spark Plug Kit

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Add to cart
G4053

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

2 Column Manometer - Synchrometer Carbtune Pro

Add to cart
MANOMETER2

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

Add to cart
MANOMETER4

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

Brass vacuum take-off adapter for carburetors and manifolds

Add to cart
9679

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Thread: 5 mm x 0.8

Overall length: 20 mm

Also fits the Weber DCOE series carburettors and Solex ADDHE.

Brass vacuum take-off adapter for carburetors and manifolds

4 Gauge Carburetor Synchronizing Balancing Tool

Add to cart
4GAUGESYNCHRO

Carburetor Vacuum Synchronizer Set.

4 gauge tool kit, mounted on a solid metal frame for easy reading.

The vacuum gauges range from 0 to -1 bar.

This measurement tool was designed to check and adjust motorcycles and cars with 2, 3 or 4 carburetors.

Each of the gauges is equipped with a damper to obtain stable readings.

The gauges allow to measure the vacuum in each of the gas tubes so you can make direct adjustments to obtain a smooth running engine.

The set comes with all necessary parts like:

  • 4 92 mm gauges fixed on a metal frame
  • 4 rubber hoses 8 x 5 x 750 mm
  • 4 hose clamps
  • 4 adapters M6 x 0.75 - length 53 mm
  • 4 adapters M6 x 1.00 - length 60 mm
  • 4 adapters M5 x 0.75 - length 98 mm
  • 4 adapters M6 x 0.75 - length 170 mm
  • 1 extension 6 x 55 mm
  • Red, blow-molded carry case

Fits the Dellorto DHLA, Dellorto DHLB, Dellorto DRLA, Dellorto PHF, Weber DCOE, Weber DCOM Solex ADDHE and many many more. Please check the list of adapters to see if they fit your particular carburetors.

4 Gauge Carburetor Synchronizing Balancing Tool

Cohline E10-resistant fuel line hose with 6 mm inner diameter

Add to cart
2134.0400

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Add to cart
2134.01.0400

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

This fuel line is DIN 73379 Type B compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 12 - 14 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Add to cart
jubilee10-12

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

Add to cart
jubilee12-14

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

Gates textile covered fuel line hose with 6 mm inner diameter

Add to cart
gatestextiel6mm

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 6 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 10 - 12 mm jubilee clips.

Gates textile covered fuel line hose with 6 mm inner diameter

10 ml Loctite 542 Thread Sealant

Add to cart
LOCTITE542-10ML

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

5 ml Loctite 243 Thread Locker

Add to cart
LOCTITE243-5ML

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

Gunson Digital Exhaust Gas and CO Tester - G4125

Add to cart
G4125

Gunson Digital Exhaust Gas and CO Tester - G4125

!