Carburetor Conversion Kits
Carburetor Conversion Kits

Carburetor Conversion Kits

On this page you will find our carburetor conversion kits.

With the these kits, old and worn down carburetors (for which there is usually only a marginal parts supply) get replaced and updated with brand new Dellorto and Weber carburetors.

Carburetor Conversion Kits

!
WCPME201
Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

If you own a Mercedes 190SL, you are probably very well aware of the fact that the original Solex PHH carburetors are reaching the end of their working life.

Wear and tear to the shafts, housings, butterfly discs etc cause irradical running, rough idle, performance and power loss and loss of driveability.

Second hand prices are running in the thousands by now and those carburettors are just as old and worn as the ones you already have...

"Off the shelf solutions" were not available so far but that has changed now!

As per today, we can offer you a 2 x Weber 40DCOE conversion kit that is tailor-made for the 190 SL!

Superbly crafted in the UK, this kit includes brand new, genuine, Weber 40DCOE carburettors expertly calibrated and jetted to suit the Mercedes so little or no additional calibration will be required (depending on the condition of your engine of course).

The kit also includes superb, CNC machined, anodized air box adapters, replacement rubber mounting blocks, plus the linkage rods, gaskets, studs etc.

We dare to say that this is the finest MB 190SL DCOE kit available on the market today.

Please note:
Barely introduced, there is already a waiting list for these kits and consequently there is a lead time of around 1 week on these kits. Please take this into account when ordering.

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

WC99004.300
Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

Adapter Plate Kit for the Datsun and Nissan L16, L18 and L20B engine series.

It allows to replace the aging and wearing Hitachi carburetor with a brand new Weber DGC, DGAV or DGEV carburetor (NOT included!).

It converts the bolt pattern to 80 x 44 mm to accommodate the above mentioned Webers.

We can also supply you with a suitable Weber carburettor or a complete conversion kit.
Please contact us with your exact needs.

Part number: WC99004.300

Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

WC99004.333
Adapter Plate Kit for Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion

Adapter Plate Kit for Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion

Adapter Plate Kit for Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion.

This is an adapter plate kit for the 1300 Suzuki Samurai SJ413 engine.

It allows to replace the aging and wearing Hitachi carburetor with a brand new Weber DGC, DGAV or DGEV carburetor (NOT included!).

It converts the bolt pattern to 80 x 44 mm to accommodate the above mentioned Webers.

The complete conversion kit including carburetor can be found HERE.

Part number: WC99004.333

Adapter Plate Kit for Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion

WC18870.99005
Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion Kit

Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion Kit

Suzuki SJ 413 Samurai Weber Carburettor Conversion Kit.

This is a conversion kit that replaces the aging Aisan 6EE carburetor on a 1342cc Suzuki Samurai SJ413 engine with manual gearbox.

With this set, the complete carburetor gets replaced with a brand new 2-stage Weber carburetor with manual choke.

The kits comprises all required parts to complete this conversion:

  • Weber 32/36 DGV carburetor
  • Choke cable, brackets and screws
  • Adapter-plate and gaskets
  • Various fitting materials
  • Stainless Steel Airfilter
  • Assembly instructions in English

Please note:
This set has a lead time of around 1 week.

Part number: WC18870.99005

Suzuki SJ413 Samurai Jeep Weber Carburetor Conversion Kit

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker