Pipercross PX300 Air Filter System
Pipercross PX300 Air Filter System

Pipercross PX300 Air Filter System

Pipercross PX300 Individual Airfilters for Automobiles.

On this page you will find the range of Pipercross PX-300 airfilter elements and base plates.

Ingenius in all its simplicity, this system does require a short explanation.

The PX300 is designed for individual carburetors and can be adapted to the available space under the bonnet.
The PX300 is designed for individual carburetors and can be adapted to the available space under the bonnet

The PX300 consists of a separate “baseplate” tailor-made for the indicated carburetor.
The PX300 consists of a separate baseplate taylor made for the indicated carburetor
Example of a baseplate for the Weber DCOE

You then choose the shape and size of filter element and your PX300 filter system is complete!
You then choose the shape and size of filter element and your PX300 filter system is complete

The baseplate is attached to the carburetor after which the filter simply hooks into place
The baseplate is attached to the carburetor after which the filter simply hooks into place

The key is then used to firmly lock the filter to the baseplate.
The key is then used to firmly lock the filter to the baseplate
If you want to remove the filter, all that is need is a quarter turn of the key and the filter can be unhooked and removed in a matter of seconds, allowing great access to the carburettor.

The filters are produced from triple-laminated Pipercross filter foam and are supported on the inside by sturdy mesh.
The filters are produced from triple-laminated Pipercross filter foam and are supported on the inside by sturdy mesh

Should there, for whatever reason, be no pre-shaped and die-cut baseplate available for your carburetor, then there is always the option of purchasing a "blank" baseplate which allows you to cut it to your specific needs.

The filters are produced in two basic shapes, the “Dome” and the “Box”.
The differences between the two are best demonstrated in the photos below:
The filters are produced in two basic shapes, the “Dome” and the “Box”. The differences between the two are best demonstrated in the photos below The filters are produced in two basic shapes, the “Dome” and the “Box”. The differences between the two are best demonstrated in the photos below
Both models have the same basics size (190 x 190 mm) to fit onto the baseplates so the differences are in the varying internal and external height.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using rampipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The following heights are available for the various models:

 Dome 

 Internal Height 

 External Height 

 C302D 

 65 mm

 40 mm

 C303D 

 90 mm

 65 mm

 C304D 

 125 mm

 100 mm

     

 Box 

 Internal Height 

 External Height 

 C3001 

 40 mm

 25 mm

 C3002 

 55 mm

 40 mm

 C3003 

 80 mm

 65 mm

 C3004 

 115 mm

 100 mm


To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

Pipercross PX300 Air Filter System

!
PX300DHLA
Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

This is the Pipercross PX300 air filter system for 1 Dellorto DHLA carburateur.

Fits the DHLA40, DHLA45 and DHLA48.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Dellorto DHLA series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

PX300PHH
Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

This is the Pipercross PX300 air filter system for 1 Mikuni 40/50 PHH carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Mikuni PHH series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

PX300ADDHE
Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

This is the Pipercross PX300 air filter system for 1 Solex ADDHE carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Solex ADDHE series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

PX300DDH
Pipercross PX300 Airfilter System for Solex DDH Carburetors

Pipercross PX300 Airfilter System for Solex DDH Carburetors

This is the Pipercross PX300 air filter system for 1 Solex DDH carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Solex DDH series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Solex DDH Carburetors

PX300175CD
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

This is the Pipercross PX300 air filter system for 1 Stromberg 175 CD carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Stromberg 175CD series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

Base plate ONLY US$ 24.95
Filterelement ONLY US$ 64.95
Total US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

PX300DCOE
Pipercross PX300 Airfilter System for Weber DCOE Carburetors

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

This is the Pipercross PX300 air filter system for 1 Weber DCOE carburateur.

Fits the DCOE40, DCOE45 and DCOE48.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Weber DCOE series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

PX300FILTER
Pipercross PX300 Airfilter Element

Pipercross PX300 Airfilter Element

These are the Pipercross PX300 air filter elements, to be used in combination with the PX300 baseplates.

An explanation of this ingenious system can be found HERE.

The filters are produced from triple-laminated Pipercross filter foam and are supported on the inside by sturdy mesh.

The filters are produced in two basic shapes, the “Dome” and the“Box”.
The differences between the two are best demonstrated in the photos below:

De tegenhanger van de "Bolhoed", de "Doos" vindt u HIER maar de verschillend worden het duidelijkst in onderstaande foto: The filters are produced in two basic shapes, the “Dome” and the“Box”.

The filters always have the same "groundplan" of 190 x 190 mm in order to fit onto the base plates.

The differences are in the shape and in- and external height.

To allow you engine to breath as freely as possible, we advise you to take the highest filter that you can fit under the bonnet.

If you are using rampipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The following heights are available for the various models:

Pipercross PX300 Dome Filter
 Dome   External Height   Internal Height 
 C302D 

 65 mm

 40 mm

 C303D 

 90 mm

 65 mm

 C304D 

 125 mm

 100 mm

 

Pipercross PX300 Box Filter
 Box   External Height   Internal Height 
 C3001 

 40 mm

 25 mm

 C3002 

 55 mm

 40 mm

 C3003 

 80 mm

 65 mm

 C3004 

 115 mm

 100 mm


You can choose the required shape and size through the dropbox at the top of this page.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

Attention!
This is the filter element only.
To be able to use this, you will always require a PX300 base plate, suitable for your carburetor.
The various baseplates that we have available can be found in the PiperCross PX300 department.

Pipercross PX300 Airfilter Element