Weber IMB Carburetor Service Kits and Parts.
Click HERE for an exploded view drawing of the Weber IMB.
Weber IMB Carburetor Service Kits and Parts
Mixture screw for the Weber IMB series carburetors.
Comes complete with the O-Ring.
The production of this screw was discontinued by Weber many years ago.
This concerns a New-Old-Stock screw and our stock is VERY limited.
This is numbers 12 + 15 in the drawing.
Required quantity per carburettor: 1
(15) Mixture Screw for Weber IMB Carburetors
Original production "Edoardo Weber" brass float for the Weber IMB series carburetors.
New-Old-Stock and getting scarcer and scarcer...
This is numbers 36 in the drawing.
(36) Original Float for Weber IMB Carburetors
Service parts kit for the Weber IMB28 series carburetors as used, amongst others, on the Fiat 500L.
Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Consists, amongst others, of the following parts to service 1 carburettor:
This is a Carburetor City service kit of outstanding Italian manufacture.
Service kit for Weber IMB 28 Carburetors for Fiat 500
Service parts kit for the Weber IMB28 series carburetors as used, amongst others, on the Fiat 126.
Service kit for Weber IMB 28 Carburetors for Fiat 126
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.
Almost a "First Aid Kit" for the home mechanic!
This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.
You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.
The sheets are made of cellulose based, plasticised gelatin-impregnated material.
The sheets are of the following thickness:
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.
Textile covered for the correct "vintage" look.
This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.
It is sold in lengths of 0.5 meter.
When ordering multiple lengths, we will do our best to supply it as 1 piece.
This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.
This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel. Please note that E10 fuel resistance is NOT mentioned by the manufacturer!
Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.NOT suited for high pressure fuel injection systems.
Key Features and Benefits:
• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering• Working pressure up to 0.6 MPa (6 kg/cm²)• Temperature range from -35°C to +100°C
Maximum, single, length: 15 meters.
This hose uses 11 - 13 mm jubilee clips.
Gates textile covered fuel line hose with 8 mm inner diameter
This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.
This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.
This fuel line is DIN 73379-2a compliant.
It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).
Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.Also suitable for Diesel fuels with Bio–Diesel addition.
Minimum bend radius in mm:
Cohline E10-resistant fuel line hose with 8 mm inner diameter
Endless Band Hose Clamp with Buckle - 5 mm wide.
Again one of those items that allows you to put the finishing touches on a restoration!
This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.
Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.
Over the years, these clamps have become harder and harder to find but we managed to find a source!
We are selling these in sets.
Such a set consist of the following:
This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.
Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.
Please note that this style of clamping is NOT suitable for steel-braided lines.
Endless Band Hose Clamp with Buckle - 5 mm wide
Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.
This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.
Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.
It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).
Can be tightened using a 7 mm socket or flat head screwdriver.Excellently suited for use with our Gates Flexi Driver tool.
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp
This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.
This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.
This fuel line is DIN 73379 Type B compliant.
This fuel line uses 15 - 17 mm jubilee clips.
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding
Sytec Fuel Line One Way Valve.
We have two versions available:
Silver anodized finish.
Prevents fuel from leaking back into the fuel tank.
Suitable for regular fuel, E10, E85 and Diesel.
We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.
Sytec Fuel Line One Way Valve
Calibrated gauges to measure jet sizes.
The perfect way to determine the exact size of jets, regardless of what is indicated on them.
Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.
With these gauges, you can still determine which size these jets are.
Indispensable when working on modified carburettors!
Two different sets available:
Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mmSet 2: 16 gauges, ranging from 1,50 to 3,00 mm
Priced per set!
Carburettor Jet Gauges
Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.
Measurements are taken by inserting the tapered needle into the jet.
The size can then directly be read from the scale.
Jet size gauge 0.5 to 1.5 mm
Jet drill set comprising 50 jet drills and and 4 pin vises.
The perfect way to fine-tune any jet to suit your needs.
Also highly suited to clean clogged-up jets.
The set contains:
54-Piece Jet Drill Set
Jet reamer kit comprising 16 reamers and and a pin vise.
16-Piece Jet Reamer Set
Gunson Colortune See Through Spark Plug Kit.
The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.
The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.
It allows you to see the combustion and to adjust the mixture by color.
Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.
Colortune will fit most vehicles.
Extra adapter sizes available separately
Available in the following basic thread sizes:
For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.
Gunson Article Number: G4074
Gunson Colortune See Through Spark Plug Kit
Gunson Car Balancer.
Internal combustion engines use a mixture of air and petrol to generate their power.
The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.
Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.
Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter
The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.
Available from our stock, ready to be shipped.
Gunson Article Number: G4053
Gunson Carbalancer Carburetor Synchronizing Tool - G4053
2 Column Manometer
The New Carbtune Pro - essential for balancing multiple carburettors.
Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.
Replacement line can be found HERE.Replacement, brass, vacuum take-off adapters can be found HERE.
2 Column Manometer - Synchrometer Carbtune Pro
4 Column Manometer / Synchronometer.
This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.
4 Column Manometer - Synchrometer Carbtune Pro
Vacuum take-off adapter for Dellorto DHLA and PHF.
Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.
Thread: 5 mm x 0.8
Overall length: 20 mm
Also fits the Weber DCOE series carburettors and Solex ADDHE.
Brass vacuum take-off adapter for carburetors and manifolds
Synchrometer airflow meter for various carburetors.
Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.
Total length of unit 121mm
Rubber cone dimensions:Small end diameter 40mmLarge end diameter 55mmLength of cone 36mm
Synchrometer airflow meter for carburetors
Carburetor Vacuum Synchronizer Set.
4 gauge tool kit, mounted on a solid metal frame for easy reading.
The vacuum gauges range from 0 to -1 bar.
This measurement tool was designed to check and adjust motorcycles and cars with 2, 3 or 4 carburetors.
Each of the gauges is equipped with a damper to obtain stable readings.
The gauges allow to measure the vacuum in each of the gas tubes so you can make direct adjustments to obtain a smooth running engine.
The set comes with all necessary parts like:
Fits the Dellorto DHLA, Dellorto DHLB, Dellorto DRLA, Dellorto PHF, Weber DCOE, Weber DCOM Solex ADDHE and many many more. Please check the list of adapters to see if they fit your particular carburetors.
4 Gauge Carburetor Synchronizing Balancing Tool
Thread Sealant - medium strength.For fine threads in hydraulic, pneumatic and general fittings.Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Excellently suited for sealing connections on carburetors and fuel pumps!
10 ml Loctite 542 Thread Sealant
Threadlocking Adhesive - medium strength.
Suitable for all metal threaded assemblies.
LOCTITE 243 is a general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
5 ml Loctite 243 Thread Locker
The Gunson Digital Exhaust Gas and CO Tester is the perfect (and affordable !) tool for the DIY mechanic to measure and adjust the CO-percentage in the exhaust gases of cars, motorcycles, boats etc equipped with a petrol-driven internal combustion engines.
Allows you to measure the current CO-percentage after which you can adjust it to the required level.
This system is equipped with a pulse pump and is suitable for both leaded and unleaded petrol / gasoline.
The tester will calibrate itself in the open air, has no moving parts to reduce wear and tear and has no filters.
Measures the CO % to 0,5 % accurately throughout the range.
Power: 12 Volt car- or motorcycle battery.
The set comprises the following:
If you require the owner's manual again, you can download it HERE.
Article Number: G4125
Additional instructions on adjusting the Gastester, in English, can be downloaded HERE.
This is a short instruction video, again in English:
Gunson Article Number: G4125
Gunson Digital Exhaust Gas and CO Tester - G4125
Dellorto, Weber and Solex Carburettors Spare Parts Jets Chokes Emulsion Tubes Service Kits