12 MM Fuel Lines
12 MM Fuel Lines

12 MM Fuel Lines

On this page you will find fuel lines, fuel unions and related materials with 12 mm diameter.

This means that the outlet has an external diameter of 12 millimeter, suitable for fuel line with an internal diameter of that same 12 millimeter.

The inlet diameter and thread varies. Please see the individual item description for details.

12 MM Fuel Lines

!
2134.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter

Cohline E10-resistant fuel line hose with 12 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 19 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter

2134.01.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 20.5 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

FPA904C
12 mm Pipe Union with 1/4 NPTF thread

12 mm Pipe Union with 1/4 NPTF thread

Brass straight 12 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 12 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 12 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using jubilee clips.

12 mm Pipe Union with 1/4 NPTF thread

J1006
Fuel Line Adapter 8 mm - 12 mm

Fuel Line Adapter 8 mm - 12 mm

Metal Fuel Line Adapter 8 mm - 12 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 12 mm.

Overall length: 53 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this adapter.

Fuel Line Adapter 8 mm - 12 mm

jubilee15-27
15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Zinc Plated Jubilee Clip Hose Clamp 15 - 27 mm for 12 mm internal diameter Flexible Fuel Line.

Neatly finished, this zinc-plated hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 15 and 27 mm external hose diameter with 12 mm internal diameter.

Can be tightened using a 6 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

FLEXIDRIVER
Flexi Driver tool to tighten Jubilee Clips

Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also in hard-to-reach places.

Suitable for 7 mm connectors.

Flexi Driver tool to tighten Jubilee Clips

LOCTITE-542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

PLEASE NOTE !
This article is currently on order from our supplier.
We expect the delivery to our warehouse the second half of February 2018.
You can pre-order your now and now payment is needed until we actually ship to you.