Ducati Carburetor Parts, Rebuild Kits and Service Sets
Ducati Carburetor Parts, Rebuild Kits and Service Sets

Ducati

Ducati Carburetor Parts, Rebuild Kits and Service Sets.

On this page you will find the carburetor rebuild kits and individual spare parts that we can supply for the various Ducati motorcycle models.

If your model isn't listed yet, please contact us by email as chances are that we can help you anyway.

!

Ducati Carburetor Parts, Rebuild Kits and Service Sets

!
KSK688
Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 400 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 Monster.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 400 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 SS SuperSport (1994-2000).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 600 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 Monster.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 600 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

Newly arrived Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 750 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

Newly arrived Haynes Weber Carburetor Manual - Zenith - SU

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 900 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 900 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

DCNF PASO
Weber DCNF44 Carburetor Service Kit for Ducati Paso

Weber DCNF44 Carburetor Service Kit for Ducati Paso

Service kit for the Weber DCNF 44 series carburetors as used on the Ducati Paso.

Contains amongst others, the following parts to service 1 carburettor:

  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete Needle Valve (size 300)
  • Internal Fuel Filter
  • Float Hinge Pin
  • Lock Tabs for Throttle Shaft Nuts
  • Various Viton o-rings
  • Various Fiber Washers
  • Various Copper Washers
  • Various Aluminum Washers

Please click HERE for the instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City carburetor service kit of outstanding Italian manufacture.

Weber DCNF44 Carburetor Service Kit for Ducati Paso

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

* NOW REVAMPED WITH NYLON CARRYING BAG AND BRASS ADAPTERS! *

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

    Total length of unit 121mm

    Rubber cone dimensions:
    Small end diameter 40mm
    Large end diameter 55mm
    Length of cone 36mm

Synchrometer airflow meter for carburetors