Hose Clamps and Jubilee Clips
Hose Clamps and Jubilee Clips

Hose Clamps

Hose Clamps / Jubilee Clips.

On this page you will find the hose clamps and Jubilee clips that we currently carry in our range.

Hose Clamps and Jubilee Clips

!
norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee7-9
7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 7 and 9 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee8-10
8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 8 and 10 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee9-11
9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 9 and 11 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee14-16
14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp 14 - 16 mm for 10 mm Flexible Fuel Line.

Neatly finished, this stainless steel (Grade 304) hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 14 and 16 mm external hose diameter with 10 mm internal diameter.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-17
15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 15 - 17 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee16-18
16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 16 and 18 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-27
15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Zinc Plated Jubilee Clip Hose Clamp 15 - 27 mm for 12 mm internal diameter Flexible Fuel Line.

Neatly finished, this zinc-plated hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 15 and 27 mm external hose diameter with 12 mm internal diameter.

Can be tightened using a 6 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

FLEXIDRIVER
Gates Flexi Driver tool to tighten Jubilee Clips

Gates Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Gate Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also on hard-to-reach places.

Comes complete with a set of 4 (four!) sockets in the following sizes:

  • 6 mm
  • 7 mm
  • 8 mm
  • 10 mm

Gates Flexi Driver tool to tighten Jubilee Clips