Dellorto SHA14, SHA15 and SHA16 Carburetor Parts
Dellorto SHA14, SHA15 and SHA16 Carburetor Parts

Dellorto SHA14 SHA15 and SHA16 Parts

Dellorto SHA14, SHA15 and SHA16 Carburetor Parts.

On this page you will find all currently available parts for the Dellorto SHA14, SHA15 and SHA16 range of carburetors.

Click HERE for an exploded view drawing of the Dellorto SHA 14, 15 and 16.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto SHA14, SHA15 and SHA16 Carburetor Parts

!
1486
(3) Main Jet for Dellorto SHA14 SHA15 and SHA16 carburetors

(3) Main Jet for Dellorto SHA14 SHA15 and SHA16 carburetors

Factory original main jet for the Dellorto SHA 14 15 and 16 carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available from our stock in sizes:

  • 33
  • 35
  • 40
  • 45
  • 48
  • 50
  • 53
  • 55
  • 58
  • 60
  • 62
  • 65
  • 67
  • 72
  • 80
  • 82
  • 84
  • 86
  • 88
  • 90
  • 118
  • 120

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 3 in the drawing.

(3) Main Jet for Dellorto SHA14 SHA15 and SHA16 carburetors

1481
(5) Cable Adjuster for Dellorto SHA14 SHA15 and SHA16 carburetors

(5) Cable Adjuster for Dellorto SHA14 SHA15 and SHA16 carburetors

Cable adjuster for the Dellorto SHA 14, 15 and 16 series carburetors.

Fits an outer cable with an external diameter of 6.75 mm.

This cable adjuster uses Lock Nut 1692 to secure its setting.
For your convenience, you can order this lock nut right along with this adjuster by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is is part of item number 5 in the drawing.

 

(5) Cable Adjuster for Dellorto SHA14 SHA15 and SHA16 carburetors

1692
(5) Lock nut for Cable Adjuster on Dellorto SHA14 SHA15 and SHA16 carburetors

(5) Lock nut for Cable Adjuster on Dellorto SHA14 SHA15 and SHA16 carburetors

This is the locknut that secures the setting on the throttle cable for the Dellorto SHA14, SHA15 and SHA16 series carburetors.

Required quantity per carburettor: 1

This is part of item number 5 in the drawing.

 

(5) Lock nut for Cable Adjuster on Dellorto SHA14 SHA15 and SHA16 carburetors

9330
(6) 40 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

(6) 40 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

40 degrees cable elbow for the Dellorto SHA 14, 15 and 16 series carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) 40 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

10854
(6) 50 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

(6) 50 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

50 degrees cable elbow for the Dellorto SHA 14, 15 and 16 series carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) 50 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

3600
(6) 70 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

(6) 70 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

70 degrees cable elbow for the Dellorto SHA 14, 15 and 16 series carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) 70 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

3698
(6) 90 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

(6) 90 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

90 degrees cable elbow for the Dellorto SHA 14, 15 and 16 series carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) 90 Degree Cable Elbow for Dellorto SHA14 SHA15 and SHA16 carburetors

1691
Lock Nut for Cable Elbow on Dellorto carburetors

Lock Nut for Cable Elbow on Dellorto carburetors

This lock nut is used on a wide variety of Dellorto carburetors to secure the cable elbow into the top cover.

Required quantity per elbow: 1

This item is usually NOT depicted in the drawing.

 

 

 

Lock Nut for Cable Elbow on Dellorto carburetors

1476A
(7) Rubber Cable Boot for Dellorto SHA14 SHA15 and SHA16 carburetors

(7) Rubber Cable Boot for Dellorto SHA14 SHA15 and SHA16 carburetors

Rubber cable cap for the Dellorto SHA14, SHA15 and SHA16 series carburetors.

Required quantity per carburettor: 1

This is item number 7 in the drawing.

 

 

(7) Rubber Cable Boot for Dellorto SHA14 SHA15 and SHA16 carburetors

1104
(8) Cable Adjuster for Dellorto SHA114 SHA15 and SHA16 carburetors

(8) Cable Adjuster for Dellorto SHA114 SHA15 and SHA16 carburetors

Cable Adjuster for Dellorto SHA114 SHA15 and SHA16 carburetors.

Required quantity per carburettor: 1

This is item number 8 in the drawing.

 

 

 

(8) Cable Adjuster for Dellorto SHA114 SHA15 and SHA16 carburetors

6109
(15) Banjo Fuel Filter for Dellorto SHA14 SHA15 and SHA16 carburetors

(15) Banjo Fuel Filter for Dellorto SHA14 SHA15 and SHA16 carburetors

Special fuel filter to fit the banjo fuel bolt of the Dellorto SHA 14, SHA 15 and SHA 16 series carburetors.

Required quantity per carburettor: 1

This is item number 15 in the drawing.

 

(15) Banjo Fuel Filter for Dellorto SHA14 SHA15 and SHA16 carburetors

6475
(16) Fuel Banjo for Dellorto SHA14 SHA15 and SHA16 carburetors

(16) Fuel Banjo for Dellorto SHA14 SHA15 and SHA16 carburetors

Fuel banjo for the Dellorto SHA 14-15-16 series carburetors.

Required quantity per carburettor: 1

This is item number 16 in the drawing.

 

 

 

 

(16) Fuel Banjo for Dellorto SHA14 SHA15 and SHA16 carburetors

3385
(17) Fiber Washer for Dellorto SHA 14 15 16 carburetors

(17) Fiber Washer for Dellorto SHA 14 15 16 carburetors

Fiber Washer for the fuel banjo of the Dellorto SHA14 SHA15 and SHA16 series carburetors.

Required quantity per carburettor: 1

This is item number 17 in the drawing.

 

 

(17) Fiber Washer for Dellorto SHA 14 15 16 carburetors

4190
(19) Screw for Fuel Banjo on Dellorto SHA 14 15 16 carburetors

(19) Screw for Fuel Banjo on Dellorto SHA 14 15 16 carburetors

Screw to secure the fuel banjo on the Dellorto SHA14, SHA15 and SHA16 series carburetors.

Required quantity per carburettor: 1

This is item number 19 in the drawing.

 

 

 

(19) Screw for Fuel Banjo on Dellorto SHA 14 15 16 carburetors

6123
(27) Float Bowl O-Ring for Dellorto SHA14, SHA 15 and SHA16 carburetors

(27) Float Bowl O-Ring for Dellorto SHA14, SHA 15 and SHA16 carburetors

Rubber (Viton) o-ring gasket for the float bowl of the Dellorto SHA 14, SHA 15 and SHA 16 series carburetors.

Required quantity per carburettor: 1

This is item number 27 in the drawing.

 

 

 

(27) Float Bowl O-Ring for Dellorto SHA14, SHA 15 and SHA16 carburetors

2838
(44) Needle Valve for Dellorto SHA 14 15 16 carburetors

(44) Needle Valve for Dellorto SHA 14 15 16 carburetors

Genuine Dellorto, viton-tipped, needle valve for the Dellorto SHA14, SHA15 and SHA16 series carburetors.

This is the solid brass version with, of course, the famous red Viton tip for perfect sealing properties.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

(44) Needle Valve for Dellorto SHA 14 15 16 carburetors

52579
(48) Service Kit for Dellorto SHA 14-15-16 carburetors

(48) Service Kit for Dellorto SHA 14-15-16 carburetors

Dellorto factory-original service kit for the Dellorto SHA 14-15-16 series carburetors.

Contains all required gaskets, seals and o-ring.

Required quantity per carburetor: 1

This is item number 48 in the drawing.

(48) Service Kit for Dellorto SHA 14-15-16 carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch