Rochester Carburetor Parts

Rochester Carburetor Parts
Rochester Carburetor Parts

Rochester Carburetor Parts.

On this page you will find all Rochester related carburetor articles.

Should you NOT see an "Add to cart" button with a product on this page here, then please click on the "More details" button as it indicates that there are choices to be made, for example regarding versions or sizes.
How to order and selected a size or version.
These choices are further explained on the page that opens after you click the "More details" button.

Please contact us by email if the part that you are looking for is not listed yet as there's a good chance that we can help you anyway.
Also feel free to contact us if you require more information or have other questions.

Our Contact Page can be found HERE.

Rochester Carburetor Parts
New Arrival !

Haynes Techbook Rochester Carburetor Manual 10230

Haynes manuals are written for the do-it-yourselfer but good enough for the professional!

This is probably the most extensive workshop manual on the market for Rochester carburettors.

It dedicates sections to identifying Rochester carburetors, basic repairs, diagnosing computer controlled carburettors, on-vehicle tuning, step-by-step repair and overhaul instructions and professional tips for more power / lower fuel consumption.

A good 340 photos and diagrams unravel the mysteries of these carburetors and

Table of contents:

  • Chapter 1: Introduction
  • Chapter 2: Tools and equipment
  • Chapter 3: Carburetor Fundamentals
  • Chapter 4: Carburetor Identification
  • Chapter 5: Trouble Shooting
  • Chapters 6: Carburetor removal and installation
  • Chapters 7: Overhaul and adjustments
  • Chapters 8: Selection and modification

Size: 8.5 x 10.6 inches

Pages: 192

Language: English

Format: Paperback

HAYNES10230
Add to cart
New Arrival !

Malpassi Petrol King Hi-Flow Fuel Pressure Regulator FPRV8/8

Malpassi Petrol King Hi-Flow Fuel Pressure Regulator.

Ideal when using an electric fuel pump to supply "high consumption" carburettors, hence the nickname "V8 Regulator".

The Petrol King Fuel Pressure regulator is suitable for most fuels except methanol.

Fuel pressure can be regulated up to a maximum of 5 PSI (0.35 Bar).

Mounting bracket and bolts included.

Equipped with a fuel pressure gauge connection and blanking plug.

The use of our Superior Quality PTFE tape on the unions is recommended.

It is supplied with fuel line connectors for fuel line with an internal diameter of 8 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes with instructions in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Article Number: FPRV8/8

FPRV8/8
Add to cart

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM
flexoid5xa4
Add to cart

Cohline textile braided fuel line hose with 8 mm inner diameter 2122.0750

This is the top-of-the-line Cohline flexible fuel line, resistant to modern day, aggressive, fuels.

It is yarn braided / cotton covered for the correct "vintage" look.

This fuel hose has an 7.5 mm inner diameter and is therewith a snug fit onto 8 mm fuel line connections.

The outer diameter is 12.5 mm.

This fuel line is sold by the meter and when ordering multiple lengths, we will do our best to supply it as 1 piece.
The maximum length is 15 meters.

This high quality hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

It is suitable for commercial fuels, including Super, E10 and Bio-Diesel.

The line is tested to 20 Bar and has a bursting pressure of 30 Bar.
The maximum working pressure is 7 Bar.

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Working temperatures:

  • Commercial fuels, gasoline mixtures and E10 fuel with a maximum Benzol content of 50%: from - 30°C up to +50°C
  • Water, air and oil: from -30°C up to +80°C
  • Diesel and Gasoil with RME additives: from -30°C up to +65°C

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.7 MPa (7 kg/cm²)

This hose uses 11 - 13 mm jubilee clips.

Please check thoroughly what diameter fuel line your system requires before finalizing your purchase!

Cohline Article Number: 2122.0750

2122.0750
Add to cart

Cohline E10-resistant fuel line hose with 8 mm inner diameter 2192.0600

This is a superb Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and is therewith a nice and tight fit for 8 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10 with a content of up to 50% Benzol.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Smooth, black, abrasion resistant CR (Chloropreen) rubber
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR (Nitrile Rubber)

Operating Temperatures:

  • Petrol: -30°C to + 50°C (-22°F - 122°F)
  • Air, Water and Heating Oil: -30°C to + 90°C (-22°F - 194°F)
  • (Bio) Diesel: -30°C to + 65°C (-22°F - 149°F)

Safety Factor:

  • >3:1 (Burst pressure = more than 3 x working pressure)

Regular pressures:

  • Regular working pressure: 6 Bars / 87 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline Part Numer: 2192.0600

Please check thoroughly what diameter fuel line your system requires before finalizing your purchase!

2192.0600
Add to cart

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

norm5mm
Add to cart

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Flexi Driver tool.

jubilee11-13
Add to cart

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding 2134.01.0600

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

This fuel line is DIN 73379 Type B compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This fuel line uses 15 - 17 mm jubilee clips.

Cohline Article Number: 2134.01.0600

Please check thoroughly what diameter fuel line your system requires before finalizing your purchase!

2134.01.0600
Add to cart

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

JSG01
Add to cart

111-Piece Jet Drill Set and Vice

111 pc jet drill set.

This set consists of a double-ended pin vice and 5 drill bits in each of the following sizes:

  • 0.6 mm
  • 0.7 mm
  • 0.8 mm
  • 0.9 mm
  • 1.0 mm
  • 1.1 mm
  • 1.2 mm
  • 1.3 mm
  • 1.4 mm
  • 1.5 mm
  • 1.6 mm
  • 1.8 mm
  • 2.0 mm
  • 2.1 mm
  • 2.2 mm
  • 2.3 mm
  • 2.4 mm
  • 2.5 mm
  • 2.6 mm
  • 2.8 mm
  • 3.0 mm
  • 3.2 mm

The set will be supplied ina sturdy and handy case as sown in the picture.

Please note that in that picture, two sets are being shown for illustration purposes.
The sets are sold and priced per 1 set.

Produced by Webcon.

98024.050
Add to cart

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm
JET REAMER
Add to cart

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

This kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately to make it even more versatile.

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

The instruction manual can also be downloaded HERE.

Additionally, an analysis chart can be downloaded HERE.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4074

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on Dellorto, SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

G4053
Add to cart

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

MANOMETER2
Add to cart

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

MANOMETER4
Add to cart

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Thread: 5 mm x 0.8

Overall length: 20 mm

Also fits the Weber DCOE series carburettors and Solex ADDHE.

9679
Add to cart

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

SYNCHRONOMETER
Add to cart

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

LOCTITE542-10ML
Add to cart

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000
LOCTITE243-5ML
Add to cart
In Backorder !

Gunson Digital Exhaust Gas and CO Tester - G4125

The Gunson Digital Exhaust Gas and CO Tester is the perfect (and affordable !) tool for the DIY mechanic to measure and adjust the CO-percentage in the exhaust gases of cars, motorcycles, boats etc equipped with a petrol-driven internal combustion engines.

It allows you to measure the current CO-percentage after which you can adjust it to the required level.

This system is equipped with a pulse pump and is suitable for both leaded and unleaded petrol / gasoline.

The tester will calibrate itself in the open air, has no moving parts to reduce wear and tear and has no filters.

Measures the CO % to 0,5 % accurately throughout the range.

Power: 12 Volt car- or motorcycle battery.

The set comprises the following:

  • The Gastester with box
  • Pulse pump with water trap
  • Metal exhaust probe
  • 3 Flexible pipes
  • Operating Manual in English

If you require the owner's manual again, you can download it HERE.

Article Number: G4125

Additional instructions on adjusting the Gastester, in English, can be downloaded HERE.

This is a short instruction video, again in English:

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4125

G4125
Add to cart

Uni-Syn Model A Carburetor Synchronizing Tool

Uni-Syn Model A Carburetor Synchronizing Tool.

Here we have the classic "one hand" synchronizer.

Light, compact and versatile, it can be used on virtually all carburetors that require synchronising of the throttle valves.

The foam-padded back ascertains a good seal against the carburettor and the red indicator will show you the measured airflow.

The indicator swivels over some 120 degrees which allows you to use it in the tightest of spaces and still get a good reading.

Suitable for carburetors / trumpets of between 35 and 75 mm in diameter (1.8 - 3.8 inches).

A true classic !

Uni-Syn
Add to cart
!